Advanced Search

2020 Vol. 2, No. 8

  Previous Issue | Next Issue 
Display Method:
Analysis on Concrete Construction Technology and Implementation Points in Water Conservancy Project Construction
BAO Dahai
2020, 2(8): 1-2.
Abstract (57) PDF (5)
Abstract:
As water conservancy projects play an important role in the process of agricultural development, they can promote agricultural development to a certain extent. As the key point of hydraulic engineering construction, concrete construction has a direct impact on the overall quality of engineering construction. At present, there are still some problems in the application of concrete construction technology in the construction of water conservancy projects in China, and the concrete construction quality is not ideal, which has caused certain restrictions on the development of agriculture in China and is not conducive to the further development of agriculture. Based on this, this paper makes an in-depth analysis of the factors affecting the concrete construction quality of water conservancy projects, and puts forward the key points of concrete construction technology implementation, in order to bring some reference for water conservancy construction units.
Research and Application of Support-free Formwork Technology for Structural Column
CHEN Lichao
2020, 2(8): 3-5.
Abstract (46) PDF (0)
Abstract:
Formwork-free construction technology has the characteristics of convenience and quickness in construction. It can not only achieve the appearance requirements of the project and ensure the quality of the project, but at the same time, as long as the concrete is poured continuously, the construction period can be greatly reduced; in addition, the construction of masonry At the same time, the corresponding construction operation can be performed on the structural column simultaneously. Practice has proved that compared with the traditional process, the new process operation is uninterrupted and can effectively guarantee the construction quality. Therefore, the construction quality of masonry and structural columns can be improved, while the diffi culty of plastering is simplifi ed, and the voids caused by uneven plastering are prevented. Hidden danger of drum cracking, with high safety. Based on this, this article expounds the support-free formwork construction technology in detail with engineering examples, and looks forward to its future development direction in the construction industry.
Analysis of the Infl uence of the Construction of the Deep and Large Foundation Pit on the Nearby Subway Station
DING Hui
2020, 2(8): 6-8.
Abstract (11) PDF (0)
Abstract:
In recent years, rail transit has developed rapidly in major cities in China and many cities have formed a complete line network. In order to facilitate travel, most civil buildings choose to build subway stations close to them. Therefore, it is inevitable that they will be in the construction of civil building foundation pits. It has a certain impact on the operation of subway stations. In order to ensure the safety of subway operations during the construction of the foundation pit, it is inevitable to adopt certain strengthened protection measures. This article analyzes the impact of the construction of a deep and large foundation pit on the operation of the subway station. Provide reference for subsequent similar project construction.
Discussion on Construction Technology Optimization Measures of Reconstruction Bridge
DU Juan
2020, 2(8): 9-10.
Abstract (11) PDF (0)
Abstract:
Since the reform and opening up, the scale of road and bridge projects in my country has continued to expand, and the early bridge projects have gradually entered the maintenance stage. It is neither scientifi c nor practical to dismantle and rebuild most old and dangerous bridges. Therefore, it is of great signifi cance to carry out the reconstruction and expansion of bridge projects. Based on this, this article analyzes and discusses the key points of rebuilding bridge construction technology optimization, in order to provide reference for bridge engineering rebuilding and expansion.
1.Zhejiang Lizhongheng Engineering Testing Co., Ltd., Lishui Zhejiang 323000;
2.Lishui Highway Branch Bureau of Zhejiang Province, Lishui Zhejiang 323000；
3.Lishui University Engineering Institute, Lishui Zhejiang 323000
FU Yuanxing
2020, 2(8): 11-12.
Abstract (26) PDF (0)
Abstract:
This paper discusses the application status of CFRP reinforcement system in highway bridges, on this basis it analyzes some common and easily neglected problems in practical application, and put forward targeted solutions, in order to further optimize the application effect of the highway bridge prestressed carbon fiber board reinforcement system.
Research on Common Problems and Countermeasures in Highway Bridge and Culvert Design
KANG Miao
2020, 2(8): 13-14.
Abstract (53) PDF (0)
Abstract:
With the continuous development of my country's transportation industry, the importance of highways has become increasingly prominent, and highway construction continues to meet the increasing demand for transportation. At present, the scale of highway construction in my country is continuously expanding. When designing highways, it is necessary to attach great importance to the design of structures such as bridges and culverts. Because the construction of bridges and culverts is difficult, in order to improve the quality of the project and solve the problems in the design of highway bridges and culverts in time, it is necessary to formulate corresponding solutions and adopt reasonable design methods to give full play to the role of highways.
Analysis on Construction Technology and Quality Control of Mass Concrete in Super High-rise Buildings
LI Wei
2020, 2(8): 15-16.
Abstract (190) PDF (1)
Abstract:
The rapid development of my country's market economy has led to the vigorous development of my country's construction industry, and at the same time, the living standards of my country's residents have been continuously improved.Based on this, people have put forward higher requirements for the quality of construction projects. At present, the number of super high-rise building groups is increasing. In order to improve the quality of super high-rise building projects, ensure the accuracy of construction technology, and avoid problems such as heat of hydration of concrete,Choose materials and construction technology to provide quality assurance.This article has conducted an in-depth study on the construction technology and quality control of mass concrete in super high-rise buildings, hoping to provide valuable reference and reference for more industry counterparts.
Discussion on the Application of Computer Information Technology in Construction Engineering in BIM Era
LI Yuhang
2020, 2(8): 17-18.
Abstract (10) PDF (0)
Abstract:
With the continuous development of computer technology, the information progress of engineering construction is also accelerating, BIM Technology is gradually fully reflected in the field of construction engineering. Based on this, this paper discusses BIM Technology, the application of BIM Technology in building construction is analyzed, and its application in architectural design, the application of BIM Technology in the current project cost management is studied, in order to further promote the development of BIM Technology.
Application of CATIA V6 in Detailed Drawing of Steel Bridge Processing
LIANG Shanguo
2020, 2(8): 19-20.
Abstract (12) PDF (3)
Abstract:
CATIA V6 is a CAD/CAE/CAM integrated software owned by Dassault Systèmes. It is suitable for conceptual design of complex modeling and large-scale construction projects, and can realize various design functions such as space surface modeling and analysis. Based on this, this article uses Dassault Systèmes' CATIA modeling software to create steel structure bridges and realizes the development of information technology from the perspective of manufacturing.
Analysis on the Application of BIM Technology in the Construction of Urban Smart Expressway
LIU Xiyuan
2020, 2(8): 21-22.
Abstract (40) PDF (0)
Abstract:
This article takes the application of BIM technology in the construction of Smart Expressway on the Second Ring Road West Road in Shaoxing City as an example, and explores the main application of BIM technology in the whole process of design, construction, and maintenance. It is BIM technology in urban expressway projects To better improve the management level of urban expressway project construction, and to serve the quality, construction period, investment control and realize the project's life cycle functional goals for exploratory attempts, in order to accumulate application and promotion experience.
Analysis on the Application of BIM Technology in Multi-unit Construction
LIU Xueming
2020, 2(8): 23-24.
Abstract (40) PDF (0)
Abstract:
At present, BIM technology is gradually being improved through continuous discussion and exploration, and various construction units are actively promoting and applying it. It is not diffi cult to see in the documents issued by various provincial governments that BIM technology is being accepted and applied. BIM technology is not only a technology, but also a kind of thinking. Based on this, this article takes the second phase of the Shanghai Mobile project as an example to introduce in detail the application of BIM technology in multi-cell construction.
Study on Pre-control Measures of Bridge Construction Object Striking Accident Based on FTA
MA Haifeng
2020, 2(8): 25-27.
Abstract (15) PDF (0)
Abstract:
Object strike is one of the most frequent accidents in bridge construction. It is diffi cult to analyze the key factors due to many infl uencing factors and great uncertainty. Based on this, this paper comprehensively uses the method of system safety analysis to analyze the basic events and importance of object strike accidents in bridge construction, and puts forward the pre control measures for object strike accidents in bridge construction It provides technical support for the safety management of bridge construction object strike accidents.
Application of Prefabricated Construction Technology in Construction Management of Construction Engineering
WANG Jianbo
2020, 2(8): 28-29.
Abstract (138) PDF (3)
Abstract:
As a new building form, the core feature of prefabricated building is to comprehensively improve building effi ciency and quality.Nowadays, prefabricated buildings in our country have many problems, such as unsatisfactory construction technology eff ects. Therefore, in order to eff ectively improve the construction eff ect of prefabricated buildings, opinions on the construction management of prefabricated buildings construction technology are proposed.This article conducts an in-depth analysis of the application of prefabricated building construction technology in construction management of construction projects, and aims to provide valuable references for industry peers.
Research on Construction Technology of Foundation Engineering of Modern Housing Construction
WANG Mingyuan
2020, 2(8): 30-31.
Abstract (16) PDF (1)
Abstract:
This paper discusses the importance of foundation engineering construction technology, the construction characteristics of foundation engineering are analyzed, the foundation construction technology is studied, and the key points of foundation construction technology, in order to provide reference for related workers.
Application and Analysis of Lime-soil Compaction Pile in Collapsible Loess Roadbed
WANG Shuishan
2020, 2(8): 32-33.
Abstract (59) PDF (1)
Abstract:
The main feature of collapsible loess subgrade is that after being soaked by water, its own gravity increases. Under the joint action of external load, it is easy to occur settlement deformation and even damage the highway structure. Based on this, the paper puts forward lime soil compaction pile method, and on the basis of comprehensive understanding of its action principle, combined with specifi c cases, analyzes and discusses its construction technology points.
Study on Construction Technology of SMA Modifi ed Asphalt Pavement
WANG Xiaoli
2020, 2(8): 34-35.
Abstract (12) PDF (0)
Abstract:
With the rapid development of society and economy, road traffic volume is increasing day by day, which puts forward higher requirements on the bearing capacity of road pavement, and the current construction requirements of traditional asphalt materials are no longer available. As a kind of asphalt material with good road performance, SMA modifi ed asphalt concrete pavement is widely used in modern high-grade highway construction. Based on specifi c cases, this paper analyzes and discusses the construction technology and quality control of SMA modifi ed asphalt pavement, in order to provide a reference for the application of SMA modifi ed asphalt.
Large Bridge Swivel Construction Technology
WANG Xiaoguang
2020, 2(8): 36-37.
Abstract (89) PDF (1)
Abstract:
Bridge swivel construction technology is employed in the case that concreting cannot be done directly by erecting formwork. Firstly,the bridge shall be prefabricated in an area which is suitable for construction, and then,by using some machines and equipment,the bridge body on the rotatable bearing shall be turned to the axis position of the bridge so as to realize the closure of the bridge.Diff erent conditions and shapes of bridge bodies have their own characteristics in construction methods.This paper introduced the construction of the bridge body with large swivel weight,large swivel angle and long beam body, which can provide reference for similar bridge construction.
Application of Grouting Technology in Bridge and Tunnel Construction
XI Yanzhao
2020, 2(8): 38-39.
Abstract (12) PDF (0)
Abstract:
In recent years, with the continuous acceleration of the urbanization process, the scale of my country's transportation construction has continued to expand. Many advanced technologies have been introduced into the construction of bridges and tunnels, and good results have been achieved.However, in the actual work process, aff ected by many factors such as weather and geological conditions, there are certain diffi culties in the construction of bridges and tunnels. If eff ective measures are not taken in time, a series of problems such as cracks are likely to occur.Based on this, it is necessary to introduce some advanced construction techniques when carrying out bridge and tunnel construction.Research has shown that through the reasonable application of grouting technology, cracks and other problems in the project can be eff ectively improved in a short time, thereby greatly improving the construction quality of bridges and tunnels.
Construction and Monitoring Technology of Subway Shield Underneath the River and Bridge Pile Foundation
XIE Qiang
2020, 2(8): 40-41.
Abstract (60) PDF (0)
Abstract:
Metro shield construction is an important part of subway engineering. Among them, it is the most difficult to construct underneath rivers and bridge pile foundations.Based on this, this article starts with the construction analysis, confirms the construction plan, and implements construction monitoring, and puts forward relevant suggestions for the construction of the subway shield under the river and the bridge pile foundation for reference.
Research on Design and Construction Technology of Building Foundation Engineering
XING Mingming
2020, 2(8): 42-43.
Abstract (15) PDF (0)
Abstract:
At present in order to meet the needs of people's daily life, at the same time it meets the requirements of the society for the construction industry, the construction industry must improve the stability and safety of buildings, in order to provide security for people's lives. Based on this, this paper discusses the importance of foundation engineering design, the foundation design and related construction technology of building engineering are studied, in order to provide reference for related foundation engineering design.
Analysis on the Application of Three-arm Rock Drill in the Construction of Super Long Tunnel
ZANG Jian
2020, 2(8): 44-45.
Abstract (9) PDF (0)
Abstract:
In recent years, the application of large-scale special tunnel construction machinery for highway tunnel construction in my country has become an industry trend, and its use experience has become more and more mature. Compared with the traditional manual drilling and blasting method, the three-arm rock drill has "safe, efficient, Comprehensive advantages such as "economy".This article takes the "East Tianshan" super-long tunnel of the Xinjiang G575 line Baha highway construction project as an example to introduce the application of the three-arm rock drill in the concrete construction, in order to provide a reference for related construction.
Study on Controlled Blasting Technology of Digital Detonator under Complex Environment
ZHANG Yafeng, WU Xiang, CAO Yile
2020, 2(8): 46-47.
Abstract (9) PDF (0)
Abstract:
The surrounding environment behind the sea world station of Shenzhen Metro Line 9 is complex, rock excavation adopts digital detonator controlled blasting technology. Based on this, this paper introduces the overall excavation idea of rock blasting excavation under complex conditions, blasting design and construction, blasting safety control and statistics and analysis of blasting eff ect, for the current municipal engineering stone excavation, in order to provide reference for municipal engineering stone excavation.
Research on Construction Technology of Cement Stabilized Macadam Base in Pavement Engineering
ZHAO Yang
2020, 2(8): 48-49.
Abstract (11) PDF (0)
Abstract:
At present, cement and two-ash stabilized semi-rigid base materials are prone to cracks, looseness and other diseases. In order to solve the cracks and durability problems, improve the quality of road driving. This paper proposes the construction technology of anti-cracking cement stabilized crushed stone base course. Based on specific engineering cases, this paper analyzes and discusses the key points of cement stabilized macadam base construction technology, in order to provide a reference for similar pavement construction.
Analysis on the Causes and Preventive Measures of Concrete Cracks in Tunnel Engineering
ZHOU Lichao
2020, 2(8): 50-51.
Abstract (54) PDF (0)
Abstract:
Aff ected by various factors, there will be cracks in the concrete lining of tunnel engineering, which seriously affects the quality of tunnel engineering.In order to ensure the stability of the lining concrete structure of the tunnel project, the reasons for the cracks should be analyzed, scientific and reasonable preventive measures should be taken to strictly control the width and quantity of the cracks, and the quality of construction raw materials and construction technology should be controlled to further improve the quality of the lining concrete construction.
Analysis on Water Supply and Drainage Design of a Municipal Solid Waste Incineration Power Plant
ZHOU Xuan
2020, 2(8): 52-53.
Abstract (173) PDF (0)
Abstract:
As the capacity of municipal solid waste landfills built in the early days of the city has become increasingly saturated, the current solid waste incineration power generation technology has gradually become an alternative to landfi ll.This article takes the design of the water supply and drainage system of a municipal solid waste incineration power plant as an example, introduces the composition of the water supply and drainage system of the waste incineration power plant and some precautions in the actual engineering design,in order to provide reference for related design.
On the Design and Construction Measures of "Ditch, Pit, Leakage and Bucket"
ZHU Haifen
2020, 2(8): 54-55.
Abstract (14) PDF (0)
Abstract:
In this paper, combined with the common building drainage problems in the construction process of many construction projects, from the aspects of design, construction, engineering acceptance and use and maintenance after acceptance, the paper discusses the drainage ditch, sump, floor drain and rainwater hopper for building drainage, so as to promote the standardized development of drainage system in China.
Analysis on the Application of Non-welded Pipeline Connection Technology in the Construction of the Hydraulic System of the Scrap Steel Breaker
CAO Dong
2020, 2(8): 56-58.
Abstract (15) PDF (0)
Abstract:
No welding pipeline technology was widely used in aviation, shipbuilding and automobile industries in the 1960s. In recent years, non-welded pipeline technology has been gradually applied to hydraulic pipelines, and its application range has become wider and wider. Therefore, how to use and develop non-welded pipeline connection technology becomes more important in production and life. Based on this, this article mainly introduces the application of non-welded pipeline connection technology in the construction process of the hydraulic system of the scrap steel crusher, in order to provide a reference for similar applications.
Analysis on the Reasons and Preventive Measures of the Installation Deviation of Metro Electromechanical Equipment
CHENG Yiyong
2020, 2(8): 59-60.
Abstract (26) PDF (0)
Abstract:
Taking Hefei Metro Line 1 as an example, this article first elaborates the characteristics of subway electromechanical equipment installation in terms of complexity, intelligence and high performance, and then analyzes the deviation of subway electromechanical equipment installation from the aspects of design, construction, communication, and audit. The reasons for the emergence are analyzed from the main structure, leakage, fire safety and aesthetics, and the hazards of the installation deviation of the subway electromechanical equipment are analyzed. Finally, the measures to prevent the installation deviation of the subway electromechanical equipment are explained from the aspects of design, acceptance, site management, and quality management. In order to provide a reference for the installation of similar equipment.
Analysis on the Concept of Energy Saving in Mechanical Design and Manufacturing and Automation Technology
DENG Wenzhe
2020, 2(8): 61-62.
Abstract (9) PDF (1)
Abstract:
In recent years, under the background of the continuous development of automation technology, the overall technical level of the mechanical design and manufacturing industry has improved signifi cantly, but the problems of large energy consumption and serious waste of resources have not been effectively solved, which is obviously not in line with the current sustainable social and economic development Claim. Based on this, this article analyzes the important role of energy-saving concepts in the field of mechanical design and manufacturing, and discusses the application of energy-saving concepts in mechanical design and manufacturing and automation technology, in order to provide a certain degree of environmental pollution control and sustainable development in the mechanical design and manufacturing industry. reference.
Application of Artifi cial Intelligence in Mechanical Design and Manufacturing and Automation
FU Yuqiang
2020, 2(8): 63-64.
Abstract (38) PDF (1)
Abstract:
This article briefly describes the principles of mechanical design and manufacturing and the connotation of artificial intelligence, and analyzes the application of artificial intelligence in the field of mechanical design and manufacturing and automation, in order to further improve the level of mechanical design and manufacturing to meet the needs of mechanical development.
Research on the Application of Mechatronics Technology in Modern Construction Machinery
JIA Yongchao
2020, 2(8): 65-66.
Abstract (12) PDF (1)
Abstract:
Mechanical engineering is not only closely related to industrial production, but also closely related to the development of other industries.Based on this, the application of mechatronics technology in mechanical engineering is very necessary.The study found that traditional mechanical engineering is restricted by application conditions, and cannot meet actual requirements in terms of work quality and efficiency, which is not conducive to the long-term stable development of various industries.On the contrary, the mechatronics construction technology can avoid the above problems, so it has certain development prospects.
Application and Optimization of Mechanical Work in Thermal Energy and Power Engineering
LI Dezhi
2020, 2(8): 67-68.
Abstract (18) PDF (0)
Abstract:
As an important concept in physics, mechanical work refers to the accumulation of moving distances in the direction of force. In the process of exploring science, people often think about how to improve effi ciency and liberate productivity. With the continuous development of society, how to apply the basic physical definition of mechanical work to the field of thermal energy and power engineering has received extensive attention from scholars. Based on this, the article fi rst explains the application of mechanical work in thermal energy and power engineering, and then proposes several optimization strategies for these problems, aiming to provide certain help to improve the effi ciency of industrial production.
Application of Intelligent Technology in Electrical Engineering Automation Control
LIU Shixin
2020, 2(8): 69-70.
Abstract (36) PDF (0)
Abstract:
With the continuous improvement of China's technical capacity and economic comprehensive strength, more and more enterprises begin to widely apply intelligent technology in electrical engineering automation control. Especially in the management, intelligent technology plays a leading role. The introduction of intelligent technology into electrical engineering and automation can improve the management quality and reduce the workload of electrical engineering construction workers. Due to the slow development of China's power engineering and automation, and relatively short time experience, our engineering has obvious drawbacks in professional aspects. Based on this, this paper describes the application of intelligent technology in electrical engineering and automation, in order to further promote the intelligent development of electrical engineering.
Application of Rapid Prototyping Technology in Integrated Manufacturing and Numerical Control Processing
QIN Huan
2020, 2(8): 71-72.
Abstract (17) PDF (1)
Abstract:
Under the influence of the rapid progress and development of social science and technology, the renewal speed of various market products has been accelerated, which has brought some challenges to the manufacture and R & D design of new products. If you want to complete the manufacturing of new products as quickly as possible, the key is to make product prototypes quickly. From the previous traditional prototype manufacturing methods, we can see that not only has a long manufacturing cycle, but also its cost is relatively high, which can not meet the actual needs of market development, so in such a situation background, Rapid prototyping technology has been eff ectively popularized and applied. Therefore, this article is aimed at fast The application of molding technology in integrated manufacturing and NC mechanical manufacturing is analyzed and discussed in detail for reference only.
Research on Intelligent Development of Mine Hoist System
WAN Yingtao
2020, 2(8): 73-74.
Abstract (43) PDF (4)
Abstract:
This article explores the use of hoist systems in gold mining units in my country, a design work plan for the centralized intelligent control system of mine hoist based on Profi bus fi eld bus and industrial Ethernet is proposed, this paper expounds the design points of each working link in the mine hoist system, in order to improve the quality and effi ciency of gold mining work.
Analysis of CNC Lathe Performance and Processing Transformation
WU Huaibiao
2020, 2(8): 75-76.
Abstract (12) PDF (0)
Abstract:
The CNC lathe is a mechatronics equipment, which has a high degree of automation. In the CNC lathe, many advanced technologies such as automatic control and detection technology and computer technology are used. At present, the numerical control transformation of lathes has broad development space in China. Based on this, this article first introduces the characteristics of CNC lathes, studies the CNC transformation and design of ordinary lathes, and expounds the machining programming of CNC lathes in order to provide a certain reference for the transformation of lathes.
Study on Casting Technology of New Building Cast Steel Fastener
ZHAO Wenfeng
2020, 2(8): 77-78.
Abstract (9) PDF (0)
Abstract:
Due to the rapid development of infrastructure projects in my country, the hidden dangers of construction safety have become a problem that cannot be ignored. At present, the casting process of cast steel fasteners used in building construction has attracted widespread attention. How to effectively improve the quality of construction steel fasteners has become a major issue in the application research of steel fasteners. This article briefl y analyzes the casting process of the new construction steel fasteners from the aspects of the difficulty in the implementation of the casting process of the construction steel fasteners and the optimization strategies in the implementation, in order to provide references for related research.
Discussion on the Application of BIM Technology in Electromechanical Installation Technology
RAN Longke
2020, 2(8): 79-80.
Abstract (41) PDF (0)
Abstract:
Mechanical and electrical installation engineering has the characteristics of strong versatility, wide span and relatively wide design area.In addition to plumbing, fi re control and power engineering, the electrical and mechanical installation of buildings also involves intelligent engineering such as electrical appliances.In the construction industry, BIM technology, as an emerging technology, has signifi cant advantages in both construction and design. The scientific use of BIM technology can gradually realize reasonable control of material costs, and then optimize and improve the construction process..Based on this, this article mainly studies the application of BIM technology electromechanical installation technology, in order to promote the intelligent development of electromechanical installation engineering.
Design and Research on Safety Protection Structure of Automobile Oil Pan
ZHOU Xinliang
2020, 2(8): 81-82.
Abstract (14) PDF (0)
Abstract:
The oil sump of the automobile engine has a closed crankcase as its oil storage tank shell, which has important functions such as preventing impurities from entering, collecting and storing lubricating oil, preventing lubricating oil from oxidizing, and dissipating heat. However, the oil sump is easy to rupture when it touches the barrier. Based on this, a new type of safety protection structure for the oil sump is designed in this paper to provide a reference for the improvement of the oil sump.
Hidden Danger and Analysis of Road and Bridge Machinery and Equipment Management Process
FENG Zheng
2020, 2(8): 83-84.
Abstract (11) PDF (0)
Abstract:
With the rapid development of my country's economy, people's demand for transportation continues to increase, which has led to a continuous increase in the number of road and bridge projects. Road and bridge machinery and equipment play an important role in the construction of the project. Improper management can easily lead to various hidden dangers, which will directly aff ect the construction of the project. Based on this, this article discusses and analyzes the hidden dangers in the management of road and bridge machinery and equipment, in order to further promote the development of my country's traffi c engineering.
Analysis on Construction Management of Intelligent Building Electrical Technology
WEI Bin
2020, 2(8): 85-86.
Abstract (111) PDF (0)
Abstract:
The emergence of intelligent buildings promotes the rapid development of our society.At present, in our society, the development of all walks of life is inseparable from the use of electricity, so power construction is becoming more and more important.The eff ective use of electrical technology for construction in intelligent buildings has become a diffi cult problem facing current construction. Based on this, this article introduces the management measures of electrical technology in intelligent buildings during construction, in order to provide references for related intelligent construction.
Application of Smart Construction Site in Project Safety Management
XU Ziyi
2020, 2(8): 87-88.
Abstract (21) PDF (1)
Abstract:
It is a general trend to improve the level of project safety management and provide eff ective support for the smooth and steady progress of project construction.Based on this, this article analyzes the application of the safety management sector in the smart construction site in Shanghai Mobile’s Lingang IDC R&D and Industrialization Base (Phase II), and briefly introduces the smart construction site’s ability to improve engineering safety management capabilities, enrich engineering safety management methods, and improveThe effectiveness of labor effi ciency and other aspects is expected to provide reference for the practice of similar projects.
Research on Site Management of Construction Machinery Equipment
YAN Weicai
2020, 2(8): 89-90.
Abstract (187) PDF (3)
Abstract:
Engineering mechanization is an important symbol of modern construction engineering. With the development of science and technology, the types and complexity of mechanical equipment are significantly different from those in the past, which puts forward higher requirements for on-site management of mechanical equipment.This article elaborates on the types of mechanical equipment in construction engineering, analyzes the problems in the on-site management of construction machinery and equipment, and proposes specific measures to strengthen the on-site management of construction machinery and equipment.
Analysis and Optimization Countermeasures of Site Management Problems in Civil Engineering Construction
YANG Tiegang
2020, 2(8): 91-92.
Abstract (13) PDF (0)
Abstract:
The quality and progress of the entire project is directly determined by the quality of the civil construction site management of a construction project, therefore the management of the construction site must be increased. Based on this, this article discusses the concept of construction site management and its importance, analyzes the problems existing in construction site management, and proposes optimization measures for site management.
Discussion on Monitoring Technology of Deep Horizontal Displacement of Foundation Pit
LIN Peng
2020, 2(8): 93-95.
Abstract (9) PDF (0)
Abstract:
Deep horizontal displacement monitoring refers to the use of inclinometer to comprehensively monitor the internal displacement of foundation pit excavation, highway foundation, dam body and other engineering soil, which plays an important role in real-time control of engineering quality and guarantee of safe construction. Based on this, this paper takes an engineering example as the background, describes the monitoring principle and error analysis of deep horizontal displacement in foundation pit monitoring.
Construction Inspection and Quality Control of Cement Stabilized Aggregate for Highway Base Material
MA Hongtao
2020, 2(8): 96-97.
Abstract (51) PDF (0)
Abstract:
This article takes the shrinkage performance of cement stabilized pellets as the research object. In order to verify the shrinkage performance of cement stabilized pellets more accurately, the characteristics of cement stabilized pellets are first explained, and combined with the temperature shrinkage mechanism, the curing and use Different ages aff ect the primary and secondary status of temperature shrinkage and dry shrinkage strain. Under normal circumstances, the shrinkage strain of cement stabilized aggregate mixture is greater. Therefore, in the construction of the base layer in the frozen soil area, attention should be paid to strengthening quality control and improving its road performance.
Design Requirements of Green and Intelligent Buildings for Architecture
CHEN Chen
2020, 2(8): 98-99.
Abstract (44) PDF (1)
Abstract:
This article mainly introduces the related concepts of green and intelligent buildings, expounds the necessity of the development of green and intelligent buildings, and discusses the design requirements of green and intelligent buildings for architecture, so as to adapt to the requirements of the new era for the development of the construction industry, thereby changing the traditional Architectural design mode, implement energy conservation and environmental protection policies, give full play to the advantages of modern science and technology, and promote the intelligent development of construction projects.
On the Landscape Design of Country House Based on the Concept of Resource Recycling
ZHOU Cong
2020, 2(8): 100-101.
Abstract (27) PDF (0)
Abstract:
With the rapid development of my country's tourism industry, there are more and more country houses. While providing good environmental conditions for tourists, it helps to stimulate the growth of tourism economy.A good rural folklore landscape can have a strong attraction to tourists, thereby enhancing tourists' travel service experience.This article introduces the basic concepts of country house landscape, analyzes the importance of country house landscape design based on the concept of resource recycling, and proposes related design strategies.
Analysis on Energy-saving, Heat Preservation and Environmental Protection Research of New Building Materials
LI Jianying
2020, 2(8): 102-103.
Abstract (8) PDF (0)
Abstract:
In order to further improve the comprehensive development level of my country's construction field, the country has increased its support for capital and technology in this field, so that the industry has shown a positive development trend. However, with the gradual development of this field and the gradual increase in support, it has caused a certain amount of damage to the natural ecological environment, and the pressure of restoration has become increasingly significant. Based on this, this article has made technical and application related research on the energy-saving, thermal insulation and environmental protection of the more popular new building materials in recent years, and further explored its future development direction.
On the Relationship between Green Building Design and Green Energy-saving Building
WANG Heng
2020, 2(8): 104-105.
Abstract (95) PDF (2)
Abstract:
At present, green buildings have become a new trend in the development of my country's construction industry. A large number of green energy-saving concepts are adopted in architectural design and construction.The concept of green building is a manifestation of whether an enterprise has good development space and high-quality work ability.However, due to various factors, there are many problems in actual project management, such as the imperfect management system and the failure to improve the engineering level of the green construction industry, which ultimately affects the project quality.Based on this, it is necessary to strengthen the management and supervision of the green building industry, and strictly control the irregular behavior in the green building industry, so as to improve the quality of the project.
Research Status of Solar Thermal Power Generation Technology and Analysis of Key Equipment Problems
ZHOU Hejun
2020, 2(8): 106-107.
Abstract (7) PDF (0)
Abstract:
This article mainly introduces the current development status of mainstream solar thermal power generation technology, and briefly analyzes the problems that are likely to occur in the operation of main equipment such as concentrators, heat absorbers, heat storage, and auxiliary equipment to provide Reference for scholars and technicians in related fi elds.
Research on the Development Trend of Urban Light Rail Transit :A Case Study of Luoyang City
CAO Qiuyun
2020, 2(8): 108-109.
Abstract (8) PDF (1)
Abstract:
The development of modern cities has greatly improved the quality of people's life in terms of food, clothing, housing and transportation, However, in the process of urbanization, excessive density of living environment, road congestion, noisy living environment and other problems will inevitably occur, thus reducing people's life experience, At present, the development trend toward suburbanization gradually appears in first-tier cities, which is an exploration of people's pursuit of high-quality life.When a city's economy and population grow to a certain extent, excessive congestion will inevitably restrict economic development, The construction cost of light rail transit is moderate, the passenger volume is moderate, especially suitable for the promotion of medium-sized cities in the suburbs and outer suburbs, From this perspective, this paper analyzes the feasibility of the development of light rail transportation in Luoyang.
Analysis on the Infl uence of New Municipal Road and Pipeline on High Speed Railway Bridge
CHEN Xuehu
2020, 2(8): 110-112.
Abstract (45) PDF (0)
Abstract:
This article takes the newly-built Haihe road in Xinxiang High-tech Zone passing through mengjiangnvhe bridge of Beijing Guangzhou high-speed railway as an example, the influence of vehicles on bridge piers and foundation of high-speed railway after construction and operation of Haihe road under Beijing Guangzhou high-speed railway is studied and analyzed. The results show that: during the construction and operation of Haihe road project Undercrossing Beijing Guangzhou high-speed railway protection project, the displacement and settlement of No. 196-201 pier of mengjiangnuhe super large bridge on Beijing Guangzhou high-speed railway and axial force of pile foundation of high-speed railway are affected. The maximum vertical, longitudinal and transverse displacements of no.196-201 piers of mengjiangnuhe super large bridge are -0.502 mm, 0.465 mm and 0.139 mm respectively, which meet the requirements of 2 mm limit in the regulations.
Elementary Analysis of Construction Ideas for Transmission Lines Crossing Power Lines without Power Cut
HUANG Jun
2020, 2(8): 113-114.
Abstract (10) PDF (0)
Abstract:
In the construction of existing transmission lines, the construction of crossing power lines is a common situation. In order to reduce the losses caused by overhead construction to the power grid during construction, the selection and application of construction technology is critical. Based on this, this article will conduct research on the construction of transmission lines crossing power lines without power failure, in order to provide references for related construction.
Problems and Countermeasures in Follow-up Audit of Hospital Infrastructure Projects
LI Jiangning
2020, 2(8): 115-116.
Abstract (25) PDF (0)
Abstract:
Tracking audit is a new audit method used in the audit of infrastructure projects. This method can implement dynamic control and supervision on infrastructure projects, thus improving the utilization rate of capital construction funds and avoiding the appearance of image projects, performance projects or bean curd dregs projects. Especially for the hospital infrastructure project, due to the large investment, long construction period and many uncontrollable factors, it is necessary to strictly control and supervise the whole process of hospital infrastructure construction by tracking audit method, so as to create a comfortable treatment and working environment for patients and medical staff .
Cause Analysis and Countermeasures of UPS Bypass Voltage Fluctuation in a Chemical Plant
MENG Qingchao
2020, 2(8): 117-118.
Abstract (53) PDF (0)
Abstract:
Two newly purchased UPS power supplies of our plant's secondary control device have been running for a short time. It was found that UPS bypass voltage display fl uctuated on site. Combined with the previous UPS fault handling experience, this paper analyzes the output voltage fluctuation of UPS bypass voltage regulator cabinet from the aspects of equipment appearance inspection, electrical and mechanical inspection and field test, It is pointed out that the power grid harmonics are the main cause of UPS bypass output voltage fluctuation, and the feasible improvement countermeasures are put forward.
Discussion and Refl ection on Interdisciplinary Cooperation in Design Workshop Teaching
SHEN Xiaoyu
2020, 2(8): 119-120.
Abstract (20) PDF (0)
Abstract:
The landscape design workshop is one of the most important courses in landscape education. It is the source of students to acquire knowledge, develop critical thinking skills and enhance creativity. In order to further highlight the "interdisciplinary collaboration" process of collaborative design methods, so as to effectively improve the teaching courses of landscape design workshops. This article explores the meaning and historical background of design workshops, analyzes the feasibility of interdisciplinary collaboration, strengthens interdisciplinary interaction, encourages diverse communication methods, and proposes a variety of strategies for creating eff ective interdisciplinary collaboration.
Explore Urban Design and Urban Planning
YANG Zongting
2020, 2(8): 121-122.
Abstract (198) PDF (0)
Abstract:
Urban planning is based on the coordination of the comprehensive effects of urban environment, urban structure, and urban economic development, which creates comfortable development conditions for people. The urban design is based on the needs of the city's overall space and humanities as the research object, and the urban image design is carried out. Based on this, this article explores the relationship between the two in terms of their connotations, concepts, diff erences and construction.
Talking about the Innovation and Application of Electric Automation Technology in Thermal Power Generation
YIN Yiyan
2020, 2(8): 123-124.
Abstract (6) PDF (0)
Abstract:
With the rapid development of my country's power industry, my country's thermal power generation has been greatly improved, but there is still a lot of room for improvement. In this case, the application of electrical automation technology should be further strengthened. This article will conduct a specifi c analysis of electrical automation technology, and outline the innovation of electrical automation technology in thermal power generation, in order to promote the application of electrical automation technology in thermal power generation.
Application of Traditional Cultural Elements in Architectural Planning and Design
ZHANG Feng
2020, 2(8): 125-126.
Abstract (55) PDF (0)
Abstract:
This paper discusses the analysis of traditional cultural elements, the importance of Chinese traditional cultural elements in architectural planning is analyzed, this paper studies the application measures of traditional cultural elements in architectural planning, in order to provide a reference for the in-depth integration of Chinese architectural planning and traditional culture.
Online and Offl ine Mixed Curriculum Construction of "Architectural Design VI" under the Mode of "Team Teaching, Class Integration"
ZHANG Lei
2020, 2(8): 127-128.
Abstract (14) PDF (0)
Abstract:
In order to break the limitations of traditional face-to-face teaching and the singularity of online teaching, we have accumulated experience through "online teaching".With the teaching concept of "adhering to traditional genes, paying attention to the frontier dynamics, exploring the past and opening up the future"; taking "team teaching, class integration" as the teaching mode, further explore and study the "online and offl ine hybrid mode" curriculum construction of "architectural design".
Copyright © Editorial Department of Intelligent Construction and Engineering Machinery京ICP备00000000号-0
Address：Box 16, No. 1, Beishatan, Deshengmenwai, BeijingTel：010-64883726Email：znjzygcjx@163.com

Supported by: Beijing Renhe Information Technology Co. Ltd