Advanced Search

2020 Vol. 2, No. 6

  Previous Issue | Next Issue 
Display Method:
Research on Identification and Countermeasures of Construction Risk Sources for Super High-rise Buildings
ZHENG Guohui
2020, 2(6): 1-2.
Abstract (11) PDF (0)
Abstract:
With the continuous expansion of the scale of cities and towns in recent years, in order to save urban land resources, a large number of super high-rise buildings continue to emerge, and the construction of super high-rise buildings often involves great construction risks. This article starts with the frequent accidents in the construction of super high-rise buildings at this stage, analyzes the causes of falling from heights and object strikes, and their severity, and proposes the effective prevention of super high-rise building accidents based on the characteristics of construction at this stage Method measures.
Study on Construction Technology of Asphalt Pavement with Large Gap Drainage and Noise Reduction
ZHANG Yaofeng
2020, 2(6): 3-4.
Abstract (25) PDF (0)
Abstract:
Large void asphalt pavement has been widely used in my country's highway engineering construction because of its good performance in noise reduction, drainage, and anti-skid. Based on a comprehensive understanding of the road performance of large-voided asphalt mixtures, this paper analyzes and discusses the key technical points of the large-voided drainage and noise reduction asphalt pavement construction and post-construction performance testing based on specific engineering cases, in order to provide relevant professional reference.
Study on the Application of Epoxy Resin Grouting Technology in the Installation of Large Equipment Unit in Chemical Plant
YU Wenrui
2020, 2(6): 5-6.
Abstract (68) PDF (0)
Abstract:
This paper takes the secondary grouting of equipment foundation in a chemical silane gas area as an example, BASF epoxy grouting material is used, pouring construction shall be carried out after mixing in proportion on site, engineering practice has proved that it has the characteristics of early strength, high tensile strength, high compression resistance, high fluidity and high strength and micro expansion under high temperature. The scheme used in this paper is based on the actual situation, it is formulated in combination with the construction method issued by the manufacturer, practice has proved that all the indexes are in line with the relevant provisions in the specification.
Research on the BIM Standard of the Integration of Highway Facilities Construction, Management and Maintenance
YANG Hong，CHEN Chen，WANG Xingwu，WU Yifan，XU Leiru
2020, 2(6): 7-10.
Abstract (11) PDF (0)
Abstract:
In Gansu province bureau of science and technology project research on gansu province highway facilities built custody integration data standards as the basis,with the line S38 Wang Geer to summer river highway reconstruction project as the backing, according to the highway engineering information model should meet the design requirements and the need to consider the construction and operational,to determine the establishment of the highway engineering information model, application, delivery should be model unit as the basic object,in order to solve project system in the process of information exchange of information provide a basis for the understanding and awareness is consistent.
Application of Concrete Construction Technology in Water Conservancy and Hydropower Projects
XIE Dongbing
2020, 2(6): 11-12.
Abstract (90) PDF (0)
Abstract:
Concrete construction technology plays a very important role in the construction of water conservancy and hydropower projects, the application and control of this technology directly determines the overall construction quality of the project. Based on this, this paper briefly introduces the concrete construction technology, on this basis, the application of concrete construction technology in water conservancy and hydropower projects is studied, in order to improve the construction quality of water conservancy and hydropower projects.
Study on Application of Air Bubble Mixed Light Soil in Road Bridge Transition Section
LU Xinyan
2020, 2(6): 13-14.
Abstract (29) PDF (0)
Abstract:
On the basis of fully mastering the engineering characteristics of air bubble mixed light soil, combined with specific engineering cases, this paper analyzes the construction process of air bubble mixed light soil in the transition section of road and bridge, and finally analyzes the settlement control situation through test detection. Thus, it can be concluded that the bubble mixed light soil has good construction effect in differential settlement control of road bridge transition section.
On the Application of BIM Technology in Architectural Design
LOU Chunyu
2020, 2(6): 15-16.
Abstract (33) PDF (1)
Abstract:
In architectural design, the application of BIM technology can greatly enhance the design effect and avoid collisions and crossings. Based on this, this paper analyzes the advantages of BIM technology through theoretical and practical research, and discusses the application of BIM technology in the field of construction, and proposes its development trend. Relevant research shows that BIM technology is a modern new design technology. The scientific and reasonable application of this technology can realize the three-dimensional and visual development of architectural design, and at the same time can improve the data effect. Therefore, this technology is worthy of extensive promotion and use value.
Application of BIM Technology in Special-shaped Secondary Structure
LIU Wenjie
2020, 2(6): 17-18.
Abstract (24) PDF (0)
Abstract:
Based on the Nanyang sewage treatment plant project, this paper introduces the application of BIM Technology in the construction of special-shaped secondary structure in the project,and elaborates the technical implementation process, effect verification, engineering quantity statistics and specific construction process, so as to provide reference for relevant personnel.
Discussion on the Maintenance and Reinforcement Technology of Zhengjialiang 2# Bridge and Yingzui Bridge of G109 Line in Baiyin Highway Section in 2019
LI Xiaoxia
2020, 2(6): 19-21.
Abstract (22) PDF (0)
Abstract:
Yingzui Bridge was built in 1998. The upper structure of the bridge is a 1～6 m reinforced concrete rectangular slab, and the lower part is a concrete U-shaped platform expansion foundation. The main diseases of the bridge: there are 6 longitudinal through seams and 2 transverse cracks at the bottom of the slab; 1 transverse through seam and 3～4 vertical cracks on the 0 and 1# platform bodies. The cracks were sealed by glue injection in 2018 Treat. The side walls have serious vertical and horizontal cracks, the concrete falls off, and the platform cap cracks; the bottom of the bridge part of the slab is effluent, rusted, and carbonized, and the concrete falls off seriously.
Talking about the Influence of the Lifting Equipment Assembled on the Ground of the Large-span Steel Structure Corridor on the Safety of the Structure Floor
GUO Qi
2020, 2(6): 22-25.
Abstract (153) PDF (2)
Abstract:
Through the engineering case of steel structure corridor lifting construction of multi-function hall of China Yagu science and technology innovation park project, the appropriate construction scheme is selected according to the site conditions. When the tower crane cannot meet the material transportation requirements, a 25t truck crane is needed to be used under the projection of the steel corridor. Due to the large construction load, measures should be taken to make the load evenly distributed, and the garage roof truck crane should be positioned Check the structural safety. According to the load calculation under multiple working conditions, the floor directly below the projection of the steel corridor in area B of the multi-functional Pavilion can meet the parking and operation requirements of the truck crane. In order to ensure the construction safety, the steel pipe support frame is set up under the first floor as the safety reserve to ensure the safety in the construction process.
Application of Prebranch Cable in Super High Rise Building
中国建筑第二工程局有限公司
2020, 2(6): 26-27.
Abstract (12) PDF (0)
Abstract:
Super high-rise buildings generally refer to buildings with a height of more than 100 meters.They are the mainstream of modern urban construction and development.Super high-rise buildings that are safe,convenient,energysaving and comfortable are more and more favored by people.With the continuous rise of super high-rise buildings,the wiring of low-voltage Alternating current distribution system has been changed,and the branch of main line cable has developed from bus bar and puncture clamp to pre-branch cable.After the introduction of pre-branch cable technology from abroad,it not only extends and deepens the wiring mode of building cable, but also effectively improves the quality of distribution lines.Therefore,starting from the technical characteristics and application advantages of pre-branch cable,this paper discusses its application strategy in super high-rise buildings,so as to promote the improvement of electromechanical engineering quality in super high-rise buildings.
Discussion on Application of Stone Filled Subgrade in Highway Engineering Construction
CHEN Guanxi
2020, 2(6): 28-29.
Abstract (12) PDF (0)
Abstract:
Studies have shown that building highway projects in mountainous areas will encounter many sections of high filling and deep excavation. Therefore, stone filling accounts for a large proportion of the total filling, and the construction factors of stone filling subgrades are complex and changeable. Based on this, this article explains how to pass Scientific construction techniques and construction techniques are used to ensure the quality of stone-filled roadbeds, in order to provide references for related construction.
On the Application of Plum-shaped Double-row Anti-slide Piles with Crown Beams in Under-stable Slopes
AN Baoping
2020, 2(6): 30-32.
Abstract (11) PDF (0)
Abstract:
Taking the unstable slope reinforcement design of the S11 Jingyuan (Gan-ning boundary)-Huating highway project as an example, the conventional rectangular anti-slide piles are relatively risky in the artificial hole construction process, and the single-row circular anti-slide piles cannot meet the anti-slide requirement. Therefore, the quincunx double-row anti-slide piles with crown beams are used as the reinforcement plan. Meanwhile, the madis software is used to model and analyze the stress, strain, displacement and internal force distribution of the anti-slide piles according to the typical section.
Talking about the Application of Steel Structure in Prefabricated Building
WANG Ning
2020, 2(6): 33-34.
Abstract (92) PDF (0)
Abstract:
In the context of energy conservation, environmental protection and green development, green buildings are the key to promoting urban green development. At present, my country's urban development process is getting faster and faster, and the number and types of urban buildings are also increasing. Steel structure has a long history of development in China's construction development, and meets the requirements of China's sustainable development, so it has a wide range of applications in the construction industry. This article mainly analyzes the advantages and application status of steel structures in prefabricated buildings, in order to promote the further development of prefabricated steel structures.
Research on the Key Technology of the Construction of the Space Grid and Truss Composite Structure of China Culture Exhibition Center
HOU Suwei
2020, 2(6): 35-37.
Abstract (39) PDF (0)
Abstract:
The main structure of Huaxia Culture Exhibition Center is a combination of space grid + truss structure. The form is complex and changeable. It has high requirements for grid installation, measurement and positioning, deformation control and other construction techniques. This paper proposes the erection of the characteristics of the combined structure. The partial load-bearing scaffolding operation platform is used to carry out the high-altitude bulk construction plan, and the measurement and positioning of the hyperboloid space grid and the installation technology of the welding ball, bolt ball, and space truss composite structure are analyzed and scientific solutions are proposed to ensure The precision and construction quality of grid installation.
Analysis on the Development of Mechanical Design Technology in the Era of Intelligent Manufacturing
ZHU Guangyao
2020, 2(6): 38-39.
Abstract (14) PDF (1)
Abstract:
With the continuous deepening of economic and trade globalization, the competitiveness of the manufacturing industry plays a vital role in the promotion of a country’s international status. The rational application of various types of science and technology in mechanical design can greatly promote the development of my country's manufacturing industry, and at the same time will be of great benefit to enhancing my country's comprehensive strength.
About Daily Maintenance and Failure Prevention of EH Oil System
ZHENG Xiang
2020, 2(6): 40-41.
Abstract (67) PDF (2)
Abstract:
This paper discusses EH oil system, the routine maintenance strategy of EH oil system and components is analyzed, the preventive measures of EH oil system failure are studied, in order to effectively extend the working life of EH oil system, the operation safety and stability of steam turbine unit are improve
Fault Diagnosis Method of Asynchronous Motor Based on Deep Learning
XUAN Yanwen
2020, 2(6): 42-44.
Abstract (17) PDF (0)
Abstract:
As the soul of the whole transmission system, asynchronous motor can not complete other work without the normal work of asynchronous motor. Based on this, this paper uses the method of deep learning to diagnose the fault of asynchronous motor, through in-depth study, accurately find the fault location of asynchronous motor and quickly find the fault diagnosis method of asynchronous motor, so as to further improve the service life of asynchronous motor.
Common Faults and Case Analysis of Large Turbogenerator
LIU Yuxin
2020, 2(6): 45-46.
Abstract (20) PDF (1)
Abstract:
This paper discusses the large turbogenerator, the common faults of large turbogenerator are analyzed, the common fault cases of large turbogenerator are studied, in order to provide reference for related workers.
Research on Operation and Maintenance Technology of Relay Protection Equipment in Intelligent Substation
HUANG Chengju
2020, 2(6): 47-48.
Abstract (12) PDF (0)
Abstract:
Substations play a very important role in maintaining the stability of the people's production and life. Relay protection equipment is an important foundation for ensuring the reliable and safe operation of substations. This article first elaborates on the development of smart substations, and at the same time, conducts detailed discussions on some related operation and maintenance, hoping to provide references for optimizing each link operation and overall quality maintenance.
Structural Design and Research of Subway Track Board Construction Vehicle
HAN Rui，FENG Tianyu，ZHAO Gang
2020, 2(6): 49-50.
Abstract (66) PDF (1)
Abstract:
This paper introduces the structural composition, functional characteristics and structural calculation method of subway track board construction vehicle. The results show that:the body structure of subway track board construction vehicle can be widened, narrowed, raised and dwarfed steplessly, and the time of changing span and height is short. It has the advantages of safety and reliability, compact structure and large lifting tonnage.
Research on Welding and Quality Control of Rotor Support of Baihetan Right Bank Power Station
HUANG Ping
2020, 2(6): 51-52.
Abstract (83) PDF (2)
Abstract:
The generator rotor is one of the main parts of hydro generator set, it has the characteristics of large size,many processes and complex structure. This paper takes the Right Bank Hydropower Station of Baihetan as an example, the welding quality control method of disc support rotor is introduced, the improvement measures of welding process for this kind of rotor bracket are summarized, the deformation control method and defect treatment measures in the welding process are mainly analyzed, in order to further improve the welding quality of rotor bracket.
Discussion on the Construction of Intelligent Project Management System for Public Buildings
ZHU Chenyang
2020, 2(6): 53-54.
Abstract (21) PDF (0)
Abstract:
With the continuous advancement of China's urbanization construction process, the construction of intelligent project management system of public buildings has begun to develop gradually. This paper analyzes the problems existing in the intelligent project management system of public buildings, and studies the improvement suggestions for the intelligent engineering management system of public buildings, in order to promote the intelligent development of China's construction industry.
Research on Management and Maintenance of Water Pump Machinery
YANG Fu
2020, 2(6): 55-56.
Abstract (50) PDF (0)
Abstract:
With the development of science and technology, pump machinery has become a widely used technology in my country's industrial production, and it has an irreplaceable position in urban life and industrial water. So far, my country's mechanical technology has made certain progress. Due to the complex application environment and procedures of water pump machinery, higher requirements are put forward for the improvement of water pump machinery. Based on this, this article analyzes the current situation of water pump machinery and equipment management in my country, and proposes some maintenance measures for reference in order to improve people's understanding of water pump machinery.
Research on Integrated Management Based on Automated Warehouse
YANG Qian
2020, 2(6): 57-58.
Abstract (22) PDF (0)
Abstract:
This paper describes the current situation of the construction of automated stereoscopic warehouse in China and points out the existing problems. The integrated management theory is applied to the construction of automated stereoscopic warehouse, which provides an important basis for the integrated control of quality, cost and progress in the construction process of automated stereoscopic warehouse, and realizes the integrated management and control of cost, quality and progress.
Application and Development of Innovative Mode in Construction Engineering Management
XIE Qiaoling
2020, 2(6): 59-60.
Abstract (82) PDF (2)
Abstract:
With the continuous improvement of the social and economic level, science and technology have also been developed at a high speed, and at the same time, the construction industry has been promoted to achieve greater development. In order to achieve the sustainable development of construction projects, relevant management systems and systems must be established, and management methods and methods must be continuously innovated. Improve effective management of its functions. Practice has proved that adding modern management concepts to the construction industry can ensure the efficiency and quality of project completion.
Exploration of Construction Project Management Innovation under the Concept of Green Construction
QIU Yanglun
2020, 2(6): 61-62.
Abstract (43) PDF (0)
Abstract:
This paper introduces the concept of green construction and the connotation of construction project management, the key points of green construction management are analyzed, the Countermeasures of innovative construction management under the background of green construction concept are studied,in order to provide reference for relevant personnel.
On Intelligent Construction Technology and Management of Building
LIANG Wenjing
2020, 2(6): 63-64.
Abstract (20) PDF (0)
Abstract:
This paper discusses the intelligent building engineering, the problems in intelligent construction management and quality control are analyzed, the construction management and quality control measures of electrical engineering of intelligent buildings are studied.
Research on Intelligent Management of Construction Machinery in UHV Converter Stations
CHEN Songtao
2020, 2(6): 65-66.
Abstract (40) PDF (0)
Abstract:
In order to improve the management and control capabilities of important construction machinery in the UHV converter station project, such as entry reporting and safe operation, this article focuses on the technical solutions for intelligent management and control of construction machinery, from entry reporting management, key information intelligent reminder, and inspection Carried out the whole process management research of construction machinery in terms of inspection and maintenance management, intelligent monitoring of abnormal problems, collision monitoring and early warning, etc., using intelligent video monitoring analysis, mobile positioning, IoT perception and other technologies to form a management platform for on-site real-time monitoring and reminding. The business processes of equipment ledger, qualification supervision, regular inspection, follow-up monitoring and other integrated management and control are used to assist construction units and managers in the refined and intelligent control of important construction machinery.
Research on the Application of BIM Technology in the Management of Water Projects
深圳市水务科技信息中心
2020, 2(6): 67-69.
Abstract (33) PDF (0)
Abstract:
In order to further increase the application proportion of BIM technology in water engineering management, and improve the government’s refined management level and efficiency of large-scale water engineering projects, this article takes the Shenzhen Water Affairs Bureau as an example to analyze BIM technology in water engineering project management Research on the application model. Through the establishment of a local water engineering BIM application standard system, the establishment of a BIM+ water engineering smart management platform, and the pilot application of engineering projects, the initial establishment of the Shenzhen water engineering BIM implementation system was achieved, while the goals of improving design quality and optimizing construction procedures were achieved. This case The successful landing of the project provides reference for similar practices in other cities.
Construction and Operation of Safety Production System for Small Water Conservancy Projects
AN Guobin
2020, 2(6): 70-71.
Abstract (14) PDF (0)
Abstract:
Water conservancy projects are an important foundation for a country's economic development and social progress. The construction of water conservancy projects has an important impact on the country's economic development. As far as my country's reality is concerned, my country has a large number of small water conservancy projects. Therefore, the construction and operation of a small water conservancy safety production system has become a decisive factor affecting my country's water conservancy development. Based on this, this article expounds the current status and significance of safety production of small water conservancy projects, in order to provide a certain reference for the development of water conservancy projects in my country from establishing safety organizations to ensuring safe production, and promote the development of water conservancy projects in my country.
Research on Construction of Smart Construction Site for Waterway Engineering Based on Quality Engineerin
HUANG Guoqian
2020, 2(6): 72-73.
Abstract (19) PDF (1)
Abstract:
The construction of waterway engineering has the characteristics of long front line, multiple structural forms, construction while navigating, many pipelines crossing the river, and complex construction environment. It often requires a lot of manpower and material resources to manage. Conventional management methods cannot meet the needs of construction management. The construction of smart construction sites can effectively solve the project management problems such as lack of authenticity of project data, excessively scattered project information, difficult to trace project problems, and difficult to supervise hidden projects, which greatly improves management efficiency and effectively avoids quality Common faults and hidden safety hazards ensure the quality of the project and lay a good foundation for the construction of quality project
Application of Laser Ranging Sensor in Ship Collision Avoidance Early Warning System
PAN Fang
2020, 2(6): 74-75.
Abstract (32) PDF (0)
Abstract:
This paper designs a low-cost ship collision avoidance early warning system suitable for small and mediumsized ships, which is mainly composed of a laser ranging sensor and a dual-degree-of-freedom pan/tilt system controlled by a single-chip microcomputer. The distance between the ship and surrounding ships is dynamically monitored in the vertical direction, and "suspicious objects" that can interfere with the navigation of the ship are detected in real time and an alarm is sent to remind the ship’s pilot to take appropriate avoidance measures in time according to the actual situation. The successful application of the system provides a powerful technical means for small and medium-sized ships to achieve precise collision avoidance.
Talking about the Measures to Improve the Quality of Gas Meter Measurement and Verification
DONG Feng
2020, 2(6): 76-77.
Abstract (19) PDF (0)
Abstract:
As a compulsory verification work, the measurement and verification of gas meters has the function of protecting the rights and interests of gas users and gas companies. Therefore, it pays attention to the influence of various influencing factors, strengthens the review of its quality verification, and adopts feasible countermeasures , And effectively improve the quality of metrological verification.
Analysis on the Dangerous Sources and Security Countermeasures in Elevator Inspection
BI Hairong
2020, 2(6): 78-79.
Abstract (16) PDF (0)
Abstract:
There is a certain risk in the inspection of elevators. In the process of inspecting elevators, inspectors need to carry out relevant operations according to the inspection specifications. Determine the dangerous source of elevator inspection, put forward targeted safety protection measures to ensure the safety of elevator inspection work.This paper analyzes the dangerous sources of elevator inspection, and puts forward targeted security countermeasures to improve the safety benefits of elevator inspection.
Study on Operation Condition Monitoring and Fault Diagnosis of Fan in Thermal Power Plan
CHEN Zhiyuan
2020, 2(6): 80-82.
Abstract (19) PDF (0)
Abstract:
As one of the main auxiliary equipment in power plant, the normal and safe operation of fan directly affects the economic situation and normal operation of power station.However, the relevant monitoring technology and fault diagnosis instruments in China are not advanced enough, and they are only stuck in the low-level stage of fixed time patrol monitoring, shutdown maintenance and follow-up status analysis. Therefore,in real life, it is often faced with fan detection time has not yet arrived, but the fan fails, resulting in shutdown and other situations, causing serious losses to enterprises.Based on this, it is very important to improve the diagnosis of fan fault system.
Application Research of SNCR Denitration Technology in Waste Incineration Power Plant
SONG Xingjian
2020, 2(6): 83-84.
Abstract (21) PDF (0)
Abstract:
This article takes the application of SNCR denitrification technology in waste incineration power plants as the research content. It introduces the denitrification process and technology respectively, and analyzes the operation case of a waste incineration project in Fujian, and puts forward the problem improvement methods in order to While effectively improving the harmful gases generated by the incineration of garbage, it further promotes green development.
Discussion and Analysis on Energy Saving Management of Urban Rail Transit
SHAO Daini
2020, 2(6): 85-86.
Abstract (26) PDF (0)
Abstract:
As an emerging industry, urban rail transit industry is developing rapidly in China, and has gradually become the main mode of urban public transport. Due to the complex structure of urban rail transit system, strict equipment requirements and the need to consume a lot of energy in the process of operation, if certain measures can be taken in the design, development and operation of urban rail transit, the energy consumption can be saved to a certain extent. Based on this, this paper discusses the energy saving of urban rail transit, and analyzes the relevant measures, in order to improve the green development of urban rail transit.
Secondary Utilization of Waste Slurry in Ready Mixed Concrete
QU Yanjun
2020, 2(6): 87-88.
Abstract (20) PDF (0)
Abstract:
In this paper the composition of waste pulp is analyzed, the reasonable mixing amount is determined by many experiments, that is to ensure the working performance and mechanical properties of concrete mixture, the waste pulp is used to the greatest extent, in order to achieve the purpose of decontamination and emission reduction,energy conservation and efficiency.
Analysis on Energy-saving Technology of Central Air Conditioning in Modern Hospitals in the New Era
LIU Yuan
2020, 2(6): 89-91.
Abstract (89) PDF (1)
Abstract:
The hospital has the characteristics of crowd concentration and large flow of people,and various advanced medical equipment has higher requirements for the working environment. When central air conditioning in hospital provides comfortable medical and working environment for patients and medical staff, it also has problems such as long running time of refrigeration unit, high power of circulating water pump and serious energy consumption. In response to the call of the state, hospital central air conditioning system can adopt relevant energy-saving technology, in order to achieve the purpose of energy saving and consumption reduction. Based on this, combined with the actual situation of the hospital, starting from the principle of central air conditioning system,this paper deeply explores the energysaving technology of central air-conditioning in modern hospitals in the new era.
Technical Analysis of Network Security Equipment for Campus All-in-one Card
ZHOU Guodong
2020, 2(6): 92-94.
Abstract (19) PDF (2)
Abstract:
The development and innovation of Internet technology have made information technology have a greater impact on people's production activities. At present, the popularization and application of all-in-one card systems in campuses are expanding, but its security needs to be improved. If you want to reduce network security hazards, it is recommended to maintain campus network security and introduce network security equipment technology during the construction of the campus all-in-one card to resolve the crisis of teacher and student property safety and information leakage. Based on this,this article outlines the campus all-in-one card system, analyzes its security risks, and explores the technical content of campus all-in-one card network security equipment around encryption technology, anti-virus technology, and firewall technology. Research has found that the application of advanced all-in-one card network security equipment technology can achieve the coordination of multiple security strategies, highlighting the operability of the all-in-one card system. Provide convenient services for school teachers and students with the help of VLAN and VPN. Filtering the MAC address protocol, IP address and other content involved in the network communication stage can resist virus attacks and malicious attacks. Shield the frequent access ports of viruses, expand legal channels for data exchanges for network users, reduce system operating costs, and give play to its predictability and timeliness. Realize the digital development of the all-in-one card system by retaining the expansion interface, so that it can achieve the goal of terminal digitization and intelligent management and settlement, protect and isolate the campus all-in-one card system, and provide technical services for education reform.
Talking about the Application of “Internet +” in the Weak Current System and Integrated Wiring of Intelligent Buildings
YU Min
2020, 2(6): 96-97.
Abstract (14) PDF (0)
Abstract:
At present, "Internet+" has become the core technology of various industries. Its application in the weak current system and integrated wiring of intelligent buildings will help improve the informatization level of the construction industry. Based on this, this article discusses the application of "Internet +" in weak current systems through omnidirectional perception and intelligent experience, and analyzes the practice of "Internet +" in the process of integrated wiring from the aspects of building an electronic physical platform and application principles. Measures to improve the construction quality of smart buildings.
Research on the Main Technique Standard for Impact Test Line in Loop Test Line of CARS
YAN Xiaochun
2020, 2(6): 98-100.
Abstract (12) PDF (0)
Abstract:
Based on the survey and analysis of major domestic and foreign Impact Test Line technical standards, this paper investigated the main technique standard of Impact Test Line, in accordance with Impact test requirements for railway vehicles and the actual situation of Loop Test Line. The results recommend 35 km/h of maximum impact speed,restricted slope of 170‰, slope height of 7.65 m and slope length of 45 m, the effective length of the impact test line is 245 m.
Talking about the Causes of Roof Waterproof Leakage and Solutions
WANG Xiangxiang
2020, 2(6): 101-103.
Abstract (138) PDF (0)
Abstract:
In recent years, with the continuous acceleration of urban modernization, the construction industry has developed rapidly, and the quality and function requirements of construction projects have become higher and higher. At the current stage, there are many hidden dangers of quality and safety in the construction process. Among them,roof leakage is one of the most common phenomena. The existence of leakage problems will not only seriously affect the functionality and service life of the building , It will also cause trouble to the normal life of residents, so it is very important to strengthen the research on roof leakage problems. Based on this, this article analyzes the causes of roof leakage in detail, and formulates corresponding solutions based on specific conditions.
Discussion on Maintenance and Repair of Railway Track
SUN Xiaogang
2020, 2(6): 104-105.
Abstract (13) PDF (1)
Abstract:
The maintenance and maintenance of railway track is the key to ensure the stable and safe operation of railway, which has a direct impact on the realization of operation benefit target. At present, there are still many defects in the maintenance and maintenance of railway track. Based on this, this paper explores the maintenance and maintenance strategies of railway track maintenance based on the author's work experience, so as to further improve the quality and level of maintenance work.
Application of Internet of Things Technology in Intelligent Building
LU Lihuan
2020, 2(6): 106-107.
Abstract (21) PDF (1)
Abstract:
This paper discusses the Internet of things technology and intelligent building, analyzes the specific application of the Internet of things technology in intelligent buildings, the problems that should be paid attention to in the application of Internet of things in intelligent building are put forward, in order to further promote the development of Internet of animals technology in intelligent buildings.
Study on the Production Technology and Influence of Autoclaved Fly Ash Aerated Concrete
LIU Peng，HU Rongjian
2020, 2(6): 108-110.
Abstract (21) PDF (0)
Abstract:
The performance of autoclaved fly ash air-entrained concrete is related to the mixing ratio of each raw material component and process quality control. This paper uses the orthogonal test method to study the influence of the main raw materials on the compressive strength and bulk density of aerated concrete, and tests a non-cement production process of autoclaved fly ash aerated concrete, and the practice proves its application in actual production.Has a good effect.
Application of Interactive Fast Rope Changing in Main Shaft of Xiaozhuang Coal Mine
LIU Changguo
2020, 2(6): 111-112.
Abstract (14) PDF (0)
Abstract:
The first rope replacement of shaft hoisting system is a key construction work with heavy workload,difficult working conditions and high risk in the management of shaft hoisting system. The traditional first rope replacement operation usually takes 3～5 days, while the interactive fast rope replacement only takes 8～10 hours. This paper introduces the application and key points of interactive fast rope replacement based on the replacement of head rope and suspension device of hoisting 2 system in main shaft of Xiaozhuang coal mine, so as to further improve the efficiency of rope replacement in Xiaozhuang coal mine.
Discussion on the Effect of Carrying out Project Cost Pre-settlement Work on Construction Engineering Design and Construction
LI Xianbo
2020, 2(6): 113-114.
Abstract (15) PDF (0)
Abstract:
Cost pre-settlement work can not only point the right direction for construction engineering design work, but also help reduce the cost and waste in the subsequent construction process, thus ensuring the orderly progress of subsequent engineering design and construction work. In the actual work process, it is necessary to formulate correct and clear working methods, strengthen the research on construction project cost management, and propose effective solutions.
Discussion on the Business Model Development of Construction Projects under the Background of "New Infrastructure"
HE Yang
2020, 2(6): 115-116.
Abstract (23) PDF (0)
Abstract:
"Regional comprehensive development" has become the main mode of "new infrastructure" in domestic infrastructure construction. Under this model, the competition between companies is no longer purely about technology and price, but more about testing the comprehensive ability of "resource integration and cash as king".This article analyzes various business models such as PPP, F+EPC, and delayed payment.
Research on the Reform of Talent Training Mode of Road and Bridge Engineering Technology Specialty under the Background of "One million Enrollment Expansion" in Higher Vocational Colleges
CHEN Juan
2020, 2(6): 117-118.
Abstract (14) PDF (0)
Abstract:
In order to fulfill the important task of "one million enrollment expansion" proposed by the CPC Central Committee and the State Council, the road and bridge engineering technology major of our institute has made a survey on the market of millions of talents,the curriculum system has been re analyzed, integrating into the "1 + X" certificate system, we will promote the operation of "credit bank" and the reform of "three education", combining production and education to build a new talent training model.
Intelligent City Internet of Things Fire Remote Monitoring System
WANG Liping
2020, 2(6): 119-120.
Abstract (74) PDF (0)
Abstract:
With the rapid development of science and technology, this paper puts forward a new "intelligent fire fighting" system based on the "traditional fire fighting" system. By comparing the intelligent fire control system with the traditional fire control system, the differences between them are put forward. On this basis, the application status of intelligent fire control information, fire control supervision and inspection, social fire safety responsibility and so on in "intelligent fire control" are analyzed in depth, and the development prospect of intelligent fire control system is prospected at the same time, in order to further promote the development of intelligent fire control system.
Analysis on the Maintenance of Railway Communication Optical Cable Line
JI Shengheng
2020, 2(6): 121-123.
Abstract (71) PDF (1)
Abstract:
This article mainly discusses the daily maintenance and management of railway communication optical cables from two aspects, and focuses on the problems in the maintenance and management of optical cables, their causes and solutions, in order to provide maintenance and management of railway communication optical cables guide.
Hidden Danger Analysis and Fire Prevention of Large-scale Commercial Complex
GAO Ji
2020, 2(6): 124-125.
Abstract (14) PDF (0)
Abstract:
By analyzing the possible fire hazards in the operation of large-scale commercial complex, this paper discusses the great harm of fire hazards to fire safety, and finally puts forward corresponding preventive measures. It is hoped that the research in this paper can provide useful reference for the fire prevention work of large commercial complexes.
Overview of Electrical Safety Protection Measures for Municipal Street Lamp Circuits
TENG Fei
2020, 2(6): 126-128.
Abstract (59) PDF (0)
Abstract:
In order to further promote the process of urbanization and gradually improve the urban infrastructure, it is necessary to do a good job in the electrical safety protection of municipal street lights. This article first elaborates the influencing factors of the electrical safety of the municipal street light circuit, then analyzes the electrical safety problems of the municipal street light circuit, and finally conducts research and analysis on how to solve these safety problems, and formulates the electrical safety protection measures of the municipal street light circuit, which must be formulated and perfected Management standards, strict supervision of specific construction, emphasis on improving the overall quality of related staff, and doing a good job in the electrical safety protection of municipal street lights.
Copyright © Editorial Department of Intelligent Construction and Engineering Machinery京ICP备00000000号-0
Address：Box 16, No. 1, Beishatan, Deshengmenwai, BeijingTel：010-64883726Email：znjzygcjx@163.com

Supported by: Beijing Renhe Information Technology Co. Ltd