Advanced Search

2020 Vol. 2, No. 1

Next Issue 
Display Method:
Application Analysis of Large Diameter Long Spiral Grouting Pile in Foundation Pit Support
ZHOU Bing
2020, 2(1): 1-4.
Abstract (25) PDF (1)
Abstract:
With the development of modern construction technology, a large number of new pile foundationconstruction technologies have appeared, the most representative of which is the large diameter long spiral cast-inplace pile. Through this construction method, not only the drilling construction but also the concrete pressure irrigation construction can be carried out, avoiding the cross construction of multiple specialties and equipment, so as to improve the concrete pouring speed and the pile forming quality. This study, combined with actual engineering cases, analyzes the application of large-diameter and long-screw cast-in-place piles in foundation pit support, and at the same time proposes construction quality control measures in order to provide reference value for relevant personnel.
Talking about the Application of Corrugated Steel Plate in Bridges and Culverts
WANG Yibo
2020, 2(1): 5-7.
Abstract (9) PDF (0)
Abstract:
This paper analyzes the manufacturing process of corrugated steel plate structure with engineering examples,mainly including structural materials, ribs, connectors, etc. On this basis, the three cross-sectional forms of corrugated steel bridge and culvert structures are compared and compared through numerical simulation analysis. Optimizing the selection of corrugated steel section to ensure the economic and social benefits of corrugated steel bridge and culvert construction.
Analysis on the Tunnel Entry Technology of Super-large Cross-section
WANG Yaxiong
2020, 2(1): 8-11.
Abstract (34) PDF (0)
Abstract:
With the continuous improvement of transportation demand in China, the fields involved in transportation construction engineering are also expanding. Therefore, tunnel engineering is facing great challenges. This article aims to improve the tunnel entry technology of super-large cross-section tunnels, combined with actual engineering cases. First, analyze the theory and development characteristics of the super-large cross-section tunnel; secondly,analyze the corresponding engineering examples; and finally, according to the actual situation of the project, analyze how to implement the construction technology of safe tunnel entry under the super-large cross-section condition.Through the discussion in this article, we hope that we can comprehensively improve the construction quality of current traffic engineering and further optimize the safety and stability of tunnel construction.
Research on Key Techniques for Preventing Car Jumping at Expressway Bridgehead
WANG Shujun
2020, 2(1): 12-14.
Abstract (14) PDF (0)
Abstract:
At present, China's expressway construction is in a high-speed development stage, and the number of bridges, culverts and other structures is increasing day by day. Bump at bridge head is a common type of disease, which will not only reduce the comfort of driving, but also accelerate the damage rate of components such as abutment.Therefore, it is necessary to understand the harm of vehicle jumping at the bridgehead of expressway, standardize the construction technology and improve the construction technology level in combination with the actual situation of the project, so as to solve the problem of vehicle jumping at the bridgehead and improve the construction quality of the project.
Discussion on Key Construction Technology of Frame Pier with Small Angle Crossing Existing Line
SUN Chuanyu
2020, 2(1): 15-17.
Abstract (75) PDF (1)
Abstract:
Combined with the 334# - 41# pier portal frame pier structure of Wangcun North Tongpu railway Super Major Bridge on the North Tongpu connecting line of Daxi passenger dedicated line, this paper introduces the construction technology of adjusting span beam, cross beam and bridge deck system transverse wet connection using stainless steel formwork outside the line to make assembly and integral hoisting, and introduces the construction technology of integral simple movable formwork used in the pouring of bridge surface flange plate, as well as the sound of the upper span existing line Barrier bracket construction technology, in order to provide reference for similar engineering construction.
Optimization Analysis of Construction Technology Scheme Based on Engineering Mechanics Theory
JING Xiaoqing
2020, 2(1): 18-22.
Abstract (11) PDF (0)
Abstract:
The theorems, laws, and conclusions of engineering mechanics are important foundations for solving practical engineering problems, and also provide a scientific theoretical basis for the optimization of construction technical solutions. The article analyzes and summarizes the process of successfully applying the theoretical knowledge of engineering mechanics to optimize the construction technical scheme of water conservancy and hydropower construction projects. The purpose is to further improve the optimization level of optimization technical schemes of construction enterprises and ensure the scientificity, safety and security of construction project technical schemes.Operability, reasonable increase of economic benefits, and the same time provide reference for similar engineering projects.
Analysis on the Application of Rotary Excavation Pile Construction Technology in Karst Strong Development Site
LI Yong
2020, 2(1): 23-26.
Abstract (43) PDF (1)
Abstract:
Rotary excavated bored cast-in-place piles have the characteristics of high construction efficiency, large hole depth, and strong adaptability. Therefore, they are widely used in the construction of the basic branch of construction engineering. More difficult. This paper analyzes the application process of rotary excavation pile construction in a shed remodeling project in Kunming undertaken by this unit, and analyzes the application process of rotary excavation pile construction technology in karst strong development sites, in order to provide reference and reference for peers.
Feasibility Study of Roof Photovoltaic Power Generation System Based on a Project
HOU Jia
2020, 2(1): 27-28.
Abstract (21) PDF (0)
Abstract:
Photovoltaic power generation is a new industry of sustainable development in China's energy development strategy. The promotion and implementation of photovoltaic power generation in people's daily life can effectively change the way of urban and rural power consumption, ensure energy security and improve the ecological environment.In this paper, the application of roof photovoltaic power generation system in a project in Shanghai is studied in order to provide reference for similar projects.
The Application of CFD Airflow Simulation in the Ventilation System of Sewage Treatment Plant
GAO Feng
2020, 2(1): 29-31.
Abstract (71) PDF (5)
Abstract:
The study found that some irritating odor gas will be generated in the process of sewage treatment, which is easily discharged in large quantities during the dehydration and drying of sludge. The malodor caused by it not only pollutes the environment but also affects the staff and surrounding residents. Healthy body. In order to optimize the mechanical ventilation of the machine room and effectively discharge odorous gases, this paper takes the sludge dewatering machine room of the Bailonggang Sludge Phase II project as the research object, and analyzes and calculates the different locations and different ventilation conditions in the machine room during the sewage treatment process through numerical simulation The concentration value of polluting gas in the environment, and on this basis to realize the analysis of the airflow distribution and the overall airflow field distribution in the environment, and propose an optimized design scheme for mechanical ventilation of the sludge dewatering machine room to guide the sewage treatment plant to Collection and treatment of malodorous gas.
On the Key Construction Technology of Roadbed Splicing in Expressway Widening Project
DONG Qingli
2020, 2(1): 32-34.
Abstract (9) PDF (0)
Abstract:
China's infrastructure construction is developing rapidly. Among them, in the construction of expressway widening projects, the subgrade splicing construction has become more and more prominent as a traditional construction technology, which attracts people's attention. In order to adapt to social and economic development, keeping pace with the development of the times, improving the technical level of subgrade splicing construction has become an inevitable development, because the level of the technical level directly affects the quality of the entire highway project. Based on this, this paper analyzes the subgrade splicing construction technology in the expressway widening project, studies the key points of the subgrade splicing construction control in the expressway widening project, and hopes to provide a reference for the future construction of the expressway reconstruction and expansion project in China.
Application Innovation and Practice of BIM Technology in Reinforcement Engineering
ZHANG Qiao
2020, 2(1): 35-38.
Abstract (17) PDF (0)
Abstract:
Since the introduction and promotion of BIM Technology by construction enterprises represented by CSCEC.BIM technology is widely used in business sectors such as construction, infrastructure construction, engineering technology, construction management, standardization system construction, and innovative R & D applications.This paper analyzes the application characteristics of BIM Technology in the field of construction and its specific role in the process of construction projects, so as to make a clear understanding of the future of technology, based on this study,the breakthrough and innovative application of this technology in the construction of steel works, the practice proves that this method can be applied to the actual construction of projects, and has certain economic benefits.
Discussion on the Application of Roller Drawing Comprehensive Method in Stress Release of Small Radius Jointless Track
CHENG Baoli
2020, 2(1): 39-40.
Abstract (168) PDF (1)
Abstract:
With the rapid development of China's economy and construction industry, the railway construction has been greatly influenced by it. In order to realize the networking operation between high-speed railways and between high-speed and general speed railways, this paper systematically analyzes the key problems of construction control,such as the uniform and accurate stress release of small radius lines 800 m and below, in the construction process of jointless track, and puts forward solutions, in order to provide reference for engineering construction.
Talking about Highway Pavement Construction Technology
WEI Qiaobang
2020, 2(1): 41-43.
Abstract (78) PDF (3)
Abstract:
This paper combines the construction cases of the Lianghui Expressway in Gansu, and analyzes the fine control measures adopted in the construction of highway pavement to improve the quality of pavement construction and provide a reference for the construction of similar projects.
Construction Control Technology of Gas Lift Reverse Circulation Bored Pile in Complex Geological Environment with High Tide Difference
LIU Dexin
2020, 2(1): 44-46.
Abstract (13) PDF (0)
Abstract:
With the rapid development of bridge construction, long-span bridges continue to emerge, so higher requirements are put forward for the quality of pile foundation. Combined with engineering examples, this paper introduces a construction method of using air lift reverse circulation drilling machine to control the quality of pile.Engineering practice shows that this method can be used in pile foundation construction in complex geological environment.
Design Points of Steel Structure Elevated Three-dimensional Cold Storage
ZHU Xuehua
2020, 2(1): 47-49.
Abstract (41) PDF (1)
Abstract:
In this paper according to the domestic cold chain market demand, combined with the current construction market requirements for new building assembly rate, this paper analyzes the application scope of the external thermal insulation steel structure overhead cold storage, and analyzes the design key points of the external thermal insulation steel structure overhead cold storage combining with the engineering examples, in order to provide reference for the similar engineering application.
Research on the Design of Automatic Carving System Based on the Application of Industrial Robot
ZHU Chongyang，LUO Zhiyun
2020, 2(1): 50-51.
Abstract (73) PDF (1)
Abstract:
With the development of industrial Internet of things, the control system with industrial robots as the main body is more and more widely used in the industrial production process. On this basis, this paper constructs an automatic engraving system composed of touch screen, single chip microcomputer, industrial robot and stepping motor, which can effectively guarantee the safety of the production process and make the production efficiency more efficient.
Numerical Simulation of Air Distribution in Long Grating Lithography Workshop
SUN Dong
2020, 2(1): 52-54.
Abstract (7) PDF (1)
Abstract:
The lithography process of long grating is a complex and precise manufacturing process, and good environmental conditions are conducive to improving product quality. In this paper, the air velocity field and temperature field formed by air conditioning and ventilation in a long grating lithography workshop are simulated and analyzed by CFD method, and the air conditioning parameters that meet the requirements of manufacturing process are determined.At the same time, the effects of air supply temperature and air supply speed on the airflow group of workshop are studied The effect of weaving can effectively reduce the cost and time of experiment and provide theoretical basis for actual production.
Research and Development of a Horizontal Lamellars System for an Automobile Brand Fair Project
ZHAO Di
2020, 2(1): 55-58.
Abstract (31) PDF (0)
Abstract:
With the deepening of reform and opening up, temporary exhibition projects have entered a period of vigorous development. Due to the ever-changing exhibition format and the increasing requirements for modeling,based on this, this article introduces the research and development process of a special modeling component system for temporary exhibitions, which is a horizontal, suspended, wooden structure shutter system. This article aims to promote the development and promotion of related styling designs by sharing with the readers the experience of special styling design development related to temporary exhibitions.
Finite Element Analysis of the Whole Working Condition of the Rotary Table Structure of the Shotcrete Truck
ZHANG Shujun
2020, 2(1): 59-62.
Abstract (38) PDF (0)
Abstract:
This article first uses the APDL language of ANSYS software to program the parameters such as the angle of the luffing arm and the telescopic length of the telescopic arm, and sort out the full working condition type of the boom structure. Analyze and obtain the displacement and stress distribution rules of the turntable structure and the stiffness, maximum strength and the most dangerous working conditions of the turntable structure. In order to ensure the structural reliability, and provide theoretical support for the optimization and modification design of the series of turntable products, on the basis of improving the design efficiency, it lays the foundation for the next step of lightweight design.
Research on Application of Valve in Seawater Desalination Process
YIN Tao
2020, 2(1): 63-65.
Abstract (10) PDF (0)
Abstract:
With the continuous improvement of the level of urbanization and industrialization in China, the shortage of fresh water resources is becoming increasingly scarce. This has become a bottleneck restricting the development of urbanization in China. Desalination of seawater has become an important choice for coastal cities to solve such problems. Valves are widely used in seawater desalination plants. As an important control component in each process,their selection and application are particularly important. This article takes a 100,000-ton desalination plant in Qingdao as an example to deeply analyze various valves in the seawater desalination process The selection basis and application process in the process, and put forward corresponding solutions to the problems.
Analysis on the Safety Lashing Measures of Gantry Crane Components in Sea Transportation
WANG Xingcun
2020, 2(1): 66-68.
Abstract (20) PDF (0)
Abstract:
The gantry crane needs to be transported by sea from the factory to the client. Because of the bad sea climate, high waves and strong winds, in order to ensure the safety of the transportation equipment, the transportation parts need to be bound. Based on this, this paper analyzes the rationality and safety of binding measures for gantry crane components. In order to provide reference for practical application.
Research on Design Features of Central Cutter Block Assembly of Compound Cutter
SUN Xiangzhi
2020, 2(1): 69-71.
Abstract (23) PDF (0)
Abstract:
This paper introduces a cutterhead central valve block assembly of a roadheader used for tunnel excavation in tunnel construction, and discusses the component composition and design characteristics of the cutterhead central valve block assembly and its assembly with the cutterhead and center rotary joint Connection method and working principle. Practice has proved that as the central rotary joint and cutter disc transition connecting part, the central valve block assembly lubricates and retracts the cutter disc copying knife, wear detection, accurate monitoring of tool wear,smooth work of cutter head mud and foam injection port Provide strong guarantees.
Analysis of the Design of a Large Lifting Beam Crane Spreader
NING Dacheng
2020, 2(1): 72-73.
Abstract (111) PDF (5)
Abstract:
This article introduces a large lifting beam crane, detailed analysis of the structure of the beam crane spreader and the role of each mechanism in the construction process, in order to achieve the promotion and application of the beam crane.
The Reach for Car-body Static Strength Design and Experiment of Midlow Speed Magnetic Levitation Train
WANG Feng
2020, 2(1): 74-75.
Abstract (50) PDF (0)
Abstract:
There is no specific specification or provision for the magnetic levitation car-body static strength because of the special structure. The designers always apply the EN12663 P-IV for the static strength calculation and simulation nowadays, however, whether it is true or not, we still need to be demonstrated. This article is aiming to theoretical analysis and calculation for the static strength through modeling, and ensuring experiment types and methods according to the EN12663 and the theoretical analysis result. And finally, this article demonstrate the rightness through the experiment to ensure that it is reasonable for the magnetic levitation car-body static strength with the mid-low speed.
Analysis of the Necessity of PLC Hydraulic Control System in Bridge Lifting Application
JI Xuhong
2020, 2(1): 76-78.
Abstract (41) PDF (2)
Abstract:
The overall lifting process of the bridge is a dynamic process that contains many uncontrollable factors.During the overall lifting process, there may be deviations between each link of the continuous box girder and the left and right sides of each pier, so the size of the deviation needs to be In the process of lifting, timely detection and corrective processing is carried out. Based on this, timely detection of deviation problems and corrective control after deviations have become the research focus of the current overall lifting process of bridges.
Analysis and Optimization Design of Monitoring Interface Based on GE Unit
DUAN Yi
2020, 2(1): 79-80.
Abstract (15) PDF (0)
Abstract:
It is found that the HMI monitoring interface of GE combustion drive unit lacks the screen of starting machine and important alarm monitoring interface. When the operator starts the machine and monitors the daily operation, he needs to constantly switch the screen and observe, which leads to the decrease of work efficiency. In this paper, the starting sequence control screen of shengu compressor unit is used for reference to optimize the starting sequence control screen not designed during the construction of GE compressor unit. New starting sequence control screen and important alarm monitoring interface are added, and the configuration and measurement of the screen are completed, so as to achieve the purpose of improving work efficiency.
Application Research of Intelligent Technology in Construction Engineering Machinery
DING Jianbo
2020, 2(1): 81-84.
Abstract (13) PDF (1)
Abstract:
The "intelligent" management of construction machinery is to comprehensively collect on-site people,materials, machines and other information through intelligent equipment, on this basis, perceive the operating behavior of construction personnel and the operating status of equipment, timely warning and alarming, and effectively reduce construction machinery equipment The incidence of safety accidents greatly improves the efficiency and level of safety management on the construction site, and ensures the safety of life and property of project construction personnel and the protection of national property from loss. This article is based on the application research of intelligent technology on construction engineering machinery, and discusses the integration of intelligent technologies such as modern communication and information technology, computer network technology, industry technology,intelligent control technology, etc. Escort for safe production. Combined with the application and implementation process of intelligent technology, it can be found that the application range of intelligent technology in the field of construction machinery is becoming more and more extensive. Occurrence, so it has a wide range of promotion and application value.
Production Management Analysis of Asphalt Mixing Station in Highway Maintenance System
XU Chuge
2020, 2(1): 85-87.
Abstract (13) PDF (0)
Abstract:
The continuous expansion of highway construction has greatly facilitated people's production and life, and promoted economic development between regions. At present, the country pays more attention to the pace of highway construction, especially the construction of asphalt highways. As a part of highway maintenance system,asphalt mixing plant is an indispensable material output area of highway construction projects in highway construction.It directly affects the development of highway construction and the entire highway industry, and strictly manages its production to ensure the quality of asphalt concrete. Satisfying the production needs will help improve the quality and maintenance efficiency of highway engineering. If the asphalt produced by the mixing plant does not meet the standard, it will directly affect the safety and life of the entire highway and affect the difficulty and efficiency of highway maintenance. In this regard, strengthening the production management of the asphalt mixing plant and improving product quality are of great significance to the entire highway maintenance system.
Design and Research on Supervision and Control System of Expressway Tunnel
SONG Xiaojie
2020, 2(1): 88-90.
Abstract (75) PDF (1)
Abstract:
The highway tunnel monitoring system can implement comprehensive management and control of highways,which is conducive to improving the efficiency of tunnel operation, ensuring road operation safety, and realizing the modern operation and development of tunnels. This article analyzes the design of the highway tunnel monitoring system, starting with its system design significance, and analyzes the design of the monitoring system to provide a reference for the design of such systems.
On the Risk and Preventive Measures of the Management Mode of Construction Project Agent
MI Yan
2020, 2(1): 91-92.
Abstract (47) PDF (1)
Abstract:
With the development of the times, the construction project agent system has developed rapidly, but there are still many problems in the management process of traditional engineering projects, which directly affects the development of China's engineering project management in the direction of modernization and standardization. Although the agent system brings various conveniences to China's construction projects, there are still many problems in the specific development process To solve. Based on the detailed research and analysis of the problems existing in the construction project management, this paper puts forward specific measures to promote the healthy development of the construction project management.
Analysis of Hidden Dangers and Solutions in the Process of Road and Bridge Mechanical Equipment Management
ZHANG Miaohong
2020, 2(1): 93-95.
Abstract (16) PDF (1)
Abstract:
In recent years, the construction technology level of China's Construction Engineering and road and bridge engineering has been rapidly improved. In the road and bridge engineering, the application of various advanced mechanical equipment has been increased. The application of mechanical equipment in the road and bridge engineering not only improves the construction efficiency, but also ensures the standardization of the road and bridge engineering construction, providing an important technical guarantee for the road and bridge engineering. However, due to the relatively complex structure of mechanical equipment, poor management will affect the operation state of mechanical equipment, and bring the corresponding security risks to the operation of mechanical equipment. Therefore, while using road and bridge mechanical equipment, we should also do a good job in the management of road and bridge mechanical equipment. Aiming at the hidden dangers in the management of road and bridge mechanical equipment,this paper analyzes the causes of the hidden dangers in detail, and puts forward corresponding solutions to improve the management level of road and bridge mechanical equipment and ensure the good operation of mechanical equipment.
Research on Life Cycle Cost Management Strategy of Mechanical Equipment
LU Zhongliang
2020, 2(1): 96-98.
Abstract (14) PDF (0)
Abstract:
This paper analyzes the cost and expense elements of mechanical equipment in the stages of purchasing,putting into operation and repairing maintenance, define the work content that the life cycle participants of mechanical equipment, such as equipment purchaser, manufacturer, user and front-line workers, should carry out in each stage, and put forward scientific management strategies focusing on how to reduce the cost and expense of each link. The scientific management strategy is universal and easy to operate, which can be used for reference by current mechanical equipment users and management enterprises.
Application Research of BIM Technology in Construction Engineering Cost Management
LIU Ying
2020, 2(1): 99-100.
Abstract (51) PDF (0)
Abstract:
In recent years, with China's economic development and social progress, China's construction engineering industry has reached a new level. Based on the important advantages of BIM technology in construction engineering cost management, its application in China's construction engineering industry The scope is getting wider and wider. To this end, this article makes a simple analysis from the application characteristics of BIM technology in construction engineering cost management, problems in construction engineering cost management and the application of BIM technology in construction engineering cost management, in order to improve the level of construction engineering cost management, Save engineering costs.
Research on Cost Control of Construction Project Based on Dynamic Management
LIU Hexuanzi
2020, 2(1): 101-103.
Abstract (76) PDF (5)
Abstract:
This paper discusses the role of dynamic management in the cost control of construction projects, analyzes the problems existing in the cost control of dynamic management projects, and based on this, puts forward the improvement measures for the cost control of dynamic management construction projects, in order to provide reference for engineering practice.
Talking about Related Technical Problems of High-speed Railway Engineering Survey
GAO Runxi
2020, 2(1): 104-105.
Abstract (27) PDF (3)
Abstract:
One of the key factors to ensure the construction quality of high-speed railways is the engineering project measurement technology. Engineering project measurement technology directly affects the normal operation of the train on the track. At present, there is still a certain gap in the construction of high-speed railway engineering projects in China compared with foreign countries. The systematic measurement theory and measurement technology of high-speed railway engineering still need to be improved. Corresponding technical difficulties often appear in highspeed railway engineering surveys. Based on the current development in the field of high-speed railway engineering survey in China, it is necessary to strengthen the research on the measurement technology, and on the basis of systematic research on the measurement technology, ensure that the train runs smoothly and safely on the track.
Research on Service Mode of Surveying and Mapping Geographic Information Based on Smart City
CUI Weiran
2020, 2(1): 106-107.
Abstract (10) PDF (0)
Abstract:
In order to meet the needs of smart city construction, provide residents with high-quality positioning information services. Therefore, the geographic information service model for surveying and mapping should be continuously optimized to form an accurate, efficient and dynamic shared data platform, which will provide strong support for the construction of smart cities. Based on this, this article mainly analyzes and discusses the surveying and mapping geographic information service model based on smart city, in order to realize intelligent surveying and mapping.
Basic Theory Analysis of Planning and Construction of Smart Ecological City
LIAN Zhensi
2020, 2(1): 108-110.
Abstract (10) PDF (0)
Abstract:
With the development of society, the scale of the city is expanding, so it is necessary to construct the smart ecological city according to the development of the city. As the natural environment needs to be protected, a reasonable and effective planning scheme is needed to promote the construction of smart ecological city. Based on the analysis of the basic theory of the planning and construction of smart eco city, this paper puts forward the planning measures of smart eco city in response to the concept of green environmental protection, which provides a guiding basis for the urban environmental assessment and is conducive to the orderly development of the environmental assessment. In addition, it can better protect the ecological environment by strengthening the analysis and evaluation of the sustainable development of environmental resources.
Talking about the Reform and Application of Tamping Coke Oven Circulating Ammonia Waste Heat in Coal Chemical System
YANG Dong，SHAO Shaobo
2020, 2(1): 111-112.
Abstract (106) PDF (1)
Abstract:
With the continuous development of China's social economy, people's awareness of environmental protection has gradually improved. At present, the reconstruction and upgrading of the existing backward project facilities has become the most effective means to save resources and improve production efficiency. Based on this, this paper introduces the energy-saving transformation process of the project and its application in the transformation of coal chemical system by using the residual heat of stamping coke oven circulating ammonia water. It has been proved by practice that after the transformation This technology has high economic benefits.
Analysis of the Dilemma of "Double Random and One Open" Fire Supervision Model and Its Countermeasures
JIA Xiaobin
2020, 2(1): 113-115.
Abstract (60) PDF (0)
Abstract:
The "double random and one open" fire management system issued by the fire protection system refers to a fire management system that randomly inspects at the city and county levels and publicizes the inspection results.Practice has proved that this system can avoid some of the disadvantages in fire management. On the basis, by conducting spot checks on social units in a timely manner, the hidden dangers of fire safety are effectively managed.
Discussion on the Key Factors Influencing the Test Results in the Test of Building Materials
QIU Yanliang
2020, 2(1): 116-117.
Abstract (62) PDF (0)
Abstract:
With the continuous development of national economy, the construction enterprises in our country have shown a good development trend. More and more local construction enterprises not only begin to pay attention to the construction efficiency, but also pay attention to the quality of materials used. As we all know, building materials are the key factors that directly affect the construction quality. Therefore, at the beginning of the construction process,the management of the construction team needs to carry out multiple quality tests on the building, and independently check the key factors that can affect the final results to ensure the construction quality.
Study on the Application of Comprehensive Geophysical Prospecting in the Monitoring of Geological Engineering
YAO Min
2020, 2(1): 118-120.
Abstract (31) PDF (0)
Abstract:
With the rapid development of the economy, people's requirements for the quality of life are gradually improving, and many industrial standards and requirements are also constantly improving, now in order to meet the needs of geological engineering monitoring and solve the limitations of traditional geophysical methods, integrated geophysical technology is applied to geological engineering monitoring.This paper expounds the role of comprehensive geophysical exploration, and further analyzes and discusses the application of comprehensive geophysical exploration in geological engineering monitoring, in order to promote the development and application of this technology.
Research on Landscape Spatial Elements and Protection Measures of Weishan Ancient City
QIN Chunli
2020, 2(1): 121-125.
Abstract (33) PDF (1)
Abstract:
Taking the ancient city of Weishan as an example, this paper analyzes the general situation of the ancient city by using the methods of literature review and field research, studies the overall spatial form and the landscape spatial elements of the ancient city itself, combines the threats and challenges faced by the ancient city of Weishan in the process of modernization, and probes into the landscape protection measures of the ancient city of Weishan with the concept of "protection first, rational development and sustainable utilization" Construction: put forward the protection content, divide the protection scope from the whole to the division and classification, and put forward specific protection measures from the landscape elements and humanities, namely, the rectification of building space, the shaping of green landscape, the transformation of water landscape, the protection and inheritance of human landscape,so as to provide suggestions and thoughts for the protection of the ancient city in the period of rapid urbanization.
Analysis on the Current Situation and Control Measures of Construction Material Quality Inspection
FAN Jingjing
2020, 2(1): 126-128.
Abstract (17) PDF (0)
Abstract:
The rapid expansion of population has greatly promoted the development of construction industry. The quality of building is directly related to the personal safety of residents. Therefore, in the construction of related projects, the construction enterprises should take the guarantee of construction quality as the primary task. Through the scientific and systematic design and construction scheme to improve the construction quality, but the research found that the quality of building materials also has an important impact on the quality of the project. In order to ensure the quality of construction, enterprises should ensure the quality of construction materials used. Based on this, this paper mainly analyzes the problems in the material quality inspection, and puts forward the corresponding control measures to ensure the quality of building materials.
Copyright © Editorial Department of Intelligent Construction and Engineering Machinery京ICP备00000000号-0
Address：Box 16, No. 1, Beishatan, Deshengmenwai, BeijingTel：010-64883726Email：znjzygcjx@163.com

Supported by: Beijing Renhe Information Technology Co. Ltd