Advanced Search

2020 Vol. 2, No. 5

  Previous Issue | Next Issue 
Display Method:
Discussion on Construction Management and Lightning Protection Measures for Safe Operation of High-voltage Overhead Lines
DOU Shuxing
2020, 2(5): 1-2.
Abstract (139) PDF (0)
Abstract:
With the continuous development of social economy, people's demand for power supply is gradually increasing, and at the same time, higher requirements are placed on the power supply capacity of the power supply system.Based on this, this article firstly introduces the construction characteristics of high-voltage overhead lines, then analyzes the construction failures of high-voltage overhead lines, and finally discusses strengthening the safe operation management and lightning protection measures of high-voltage overhead lines, in order to further promote the development of high-voltage overhead lines.
Talking about the Construction Technology and Quality Control Key Points of Asphalt Pavement in Highway Engineering
GENG Chunbo
2020, 2(5): 3-4.
Abstract (11) PDF (0)
Abstract:
In order to improve the quality of asphalt road construction and ensure that the road surface is stronger, it is necessary to improve the construction quality of asphalt pavement by adopting reasonable construction techniques and more stringent quality control measures to ensure road safety and improve people’s travelThe safety and comfort.Based on this, this article mainly analyzes the key points of construction technology and quality control in asphalt pavement construction in order to improve the performance of the road.
Application of Pipeline CCTV Inspection in Deqing Provincial Highway 304 PPP Project Tunnel Drainage Engineering
CAI Quanhua
2020, 2(5): 5-6.
Abstract (87) PDF (1)
Abstract:
This article introduces the working principle of CCTV detection technology, discusses in detail the classification, grade and defect location representation method of tunnel pipeline defects, and introduces CCTV pipeline endoscopic inspection using the CCTV inspection of tunnel drainage pipe of Deqing 304 Provincial Highway PPP project as an exampleThe application and effect of the technology are expected to provide references for similar engineering applications.
Research on Hospital Interior Design Based on Intelligent Technology
HE Shifeng
2020, 2(5): 7-9.
Abstract (13) PDF (0)
Abstract:
This article takes a comprehensive hospital as an example, combined with the concept of intelligent design,expounds the design plan of hospital buildings under the background of the new era, proposes the definition of intelligent hospital buildings, and summarizes the classification standards, unique characteristics and corresponding medical treatment of hospital buildings. The functional division standard also puts forward the important significance of the intelligent development of hospital buildings. Based on this, based on intelligent technology, the hospital building interior design and intelligent system design schemes are proposed, in order to further optimize the hospital intelligent design scheme.
Analysis of Construction Quality Control of Coal Bunker Slipform Engineering
JIANG Guangxue
2020, 2(5): 10-11.
Abstract (51) PDF (0)
Abstract:
With the continuous emergence of various new building structures in my country, the construction technology level of building engineering has been continuously improved, which has promoted the innovative development of slipform construction technology to a certain extent. In order to further meet the basic requirements of the current rapid development of construction technology in construction projects, construction units need to continuously strengthen the application of new technologies and new processes to improve construction quality.Based on this, this article analyzes and discusses the construction quality control of coal bunker slipform engineering for a certain actual project, in order to provide reference for related projects.
Construction Technology of Cement Internal Partition Wall with Hollow Internal Formwork and Metal Mesh
JIAO Zujie
2020, 2(5): 12-14.
Abstract (25) PDF (0)
Abstract:
Hollow internal formwork metal mesh cement internal partition wall is referred to as good fixed wall. It is a kind of non demolition internal formwork wall which uses metal mesh as the internal structure of the wall and covers its surface with cement mortar. The hollow inner membrane metal mesh is made of cold-rolled steel and rolled to form the framework of the hollow internal mold. Good fixed wall not only inherits the advantages of traditional brick wall, but also improves it, making up for the characteristics of poor sound insulation, long construction period and easy to produce cracks, so that the construction technology quality of partition wall has been developed. Therefore, this paper discusses its construction technology, hoping to provide some reference for the development of hollow internal formwork metal mesh cement internal partition wall construction technology.
Talking about the Application of Construction Technology of Filling Stone Subgrade in Highway Construction
LI Huibin
2020, 2(5): 15-16.
Abstract (12) PDF (0)
Abstract:
As the scale of highway construction continues to expand, the complex terrain environment has become the main factor affecting highway construction. Based on the principle of economy, in this type of road construction,stone-filled roadbeds with large-size fillers are often used. Studies have shown that selecting strong and hard stones,optimizing the construction rolling combination and compaction parameters, strengthening foundation treatment, and doing a good job in slope protection can improve the construction quality of stone-filled roadbeds. Based on the actual construction conditions of a project, this paper adopts the construction technology of stone-filled roadbed to reduce the project cost. Practice has proved that the application of the stone-filled roadbed construction technology has good results.
Research on Construction Technology of Prefabricated Steel Structure Commercial Complex
LIU Shikui
2020, 2(5): 17-18.
Abstract (85) PDF (0)
Abstract:
This article combines specific construction engineering cases to conduct an in-depth analysis of the construction technology and quality control methods of the prefabricated steel structure commercial complex, in order to improve the construction quality of the prefabricated steel structure, and at the same time provide a reference for related staff to carry out similar construction.
Research on Construction Quality Control of Wind Farm Civil Engineering
LUO Bin
2020, 2(5): 19-20.
Abstract (7) PDF (0)
Abstract:
With the rapid development of national economy, the construction scale of renewable energy projects continues to expand. Due to the lack of quality control in the whole process, there are weak points in personnel and management of civil engineering of wind farm, which leads to frequent quality problems. Therefore, how to do a good job in the construction quality control and management of wind farm civil engineering becomes the key. This paper analyzes the main quality problems existing in the construction, and puts forward the corresponding quality control countermeasures, in order to comprehensively improve the quality of the project.
Discussion on Geotechnical Engineering Foundation Design and Countermeasures
MENG Libo
2020, 2(5): 21-22.
Abstract (43) PDF (0)
Abstract:
Foundation design is directly related to the stability and safety of construction project construction process.Based on this, combined with the theoretical basis and practical experience, this paper comprehensively expounds the problems in the foundation design and geotechnical engineering investigation, and puts forward corresponding solutions to the problems, so as to provide reference for the majority of the same.
Application of Cast-in-place Foam Light Soil in Highway Reconstruction and Expansion of High Fill Subgrade
WANG Haiying
2020, 2(5): 23-24.
Abstract (20) PDF (0)
Abstract:
In recent years, my country's economy has grown rapidly and the scale of road construction has continued to expand. To meet the increasing traffic demand, the implementation of reconstruction and expansion of the original road has become a key task. As a kind of lightweight material, foamed lightweight soil has the characteristics of low weight, environmental protection and vertical filling. Compared with EPS lightweight materials, foamed lightweight soil has better durability. Based on this, this article analyzes and discusses the application effect of cast-in-situ foam lightweight soil based on a comprehensive understanding of the characteristics of foam lightweight soil, combined with specific cases, in order to improve construction quality.
Construction Technology of Steel Bar in Civil Engineering
WANG Tai
2020, 2(5): 25-26.
Abstract (53) PDF (1)
Abstract:
Since the reform and opening up, China's social economy has made rapid development, and the construction capacity of water conservancy and hydropower projects has been significantly improved. As an important part of water conservancy and hydropower construction project, civil engineering plays an important role in supporting the whole construction project. In the construction of civil engineering, the reinforcement construction is the most basic part,and the level of reinforcement construction technology directly affects the construction quality of civil engineering.Strict control of reinforcement construction technology is the key and difficult point of construction management.This paper analyzes the steel bar processing technology, steel bar connection technology, steel bar binding and installation technology in civil engineering, so as to clarify the key points of steel bar construction technology, standardize the construction process, and ensure the high-quality and efficient construction of water conservancy and hydropower civil engineering.
Design Method of Power Supply and Distribution System for Large Commercial Complex
XUE Tengfei
2020, 2(5): 27-28.
Abstract (12) PDF (0)
Abstract:
With the development of China's society and the continuous improvement of people's living standards,there are more and more large-scale commercial complex buildings in cities. Large commercial complex has a large number of electrical equipment, so the design of power supply and distribution system is very important in its construction. This paper analyzes the design requirements, principles and procedures of power supply and distribution system of large commercial complex, in order to provide reference for the staff in the same industry.
Development and Research Status of Rectangular Pipe Jacking Technology
YAN Xueguang
2020, 2(5): 29-30.
Abstract (26) PDF (1)
Abstract:
With the gradual advancement of engineering technology, the current modern infrastructure construction has a more advanced technical system. Combining with the rectangular pipe jacking construction technology, this paper first analyzes the development foundation and application advantages of this technology, then expounds the development status of domestic rectangular pipe jacking technology, and finally expounds the rectangular pipe jacking technology in the field of current modern infrastructure construction The difficulties encountered in the process of construction and development are intended to lay a theoretical foundation for the development of this technology through this paper.
Talking about the Construction Technology of Municipal Engineering Pipe Gallery and Pipe Network
YANG Congbing
2020, 2(5): 31-32.
Abstract (13) PDF (0)
Abstract:
In recent years, with the development of social economy and the rapid progress of science and technology,the construction of modern cities has gradually accelerated, and the number of municipal engineering constructions is increasing day by day, and urban construction is mainly carried out around the transformation of old cities.Since underground pipelines need to be laid during the reconstruction and expansion of the old city, in order to effectively reduce the difficulty of the entire project construction, reduce construction capital investment, and accelerate the construction progress, this article analyzes the construction process of the pipe gallery and pipe network in the municipal engineering construction in detail., In order to provide reference for related design.
Research on Construction Technology and Optimization Measures of Anti-leakage in Housing Construction
YUAN Xiao
2020, 2(5): 33-34.
Abstract (53) PDF (0)
Abstract:
With the development of economy, people's requirements for living conditions are getting higher and higher, especially the requirements for housing quality are also increasing year by year. At this stage, some quality problems existing in the construction of housing projects will have a greater impact on the quality of the building and the comfort of living. Based on this, this article analyzes and studies the anti-leakage technology and its optimization measures in the construction of housing projects, in order to further improve the quality of housing construction.
Application of Permeable Pavement in Municipal Road Construction
ZHANG Hongliang
2020, 2(5): 35-36.
Abstract (34) PDF (0)
Abstract:
Permeable asphalt pavement is a large-pore, ecological and environmentally friendly mixture structure, and its porosity can reach 18% to 25%, so it has a broad application space in the construction of municipal roads. Based on this, this paper proposes a construction technology of thermosetting epoxy asphalt permeable pavement, in order to effectively overcome the defects of ordinary permeable pavement, and then achieve a good construction effect.
Elementary Discussion on the Application of Milling Technology in Wushaoling No.1 Tunnel Concrete Pavement Surface
ZHANG Shengjun
2020, 2(5): 37-38.
Abstract (17) PDF (0)
Abstract:
As a construction technology to improve the friction of the road surface and the depth of the structure,the milling process can quickly mill irregular longitudinal textures on the road surface without significantly improving the road noise and does not affect the driving comfort. At the same time, the bonding ability of the subsequent process paving materials or spray materials that may be produced is improved. Based on this, this article introduces the application occasions and performance of the milling process, the LX1850 pavement milling car and its specific application in the concrete pavement construction of Wushaoling No. 1 Tunnel. Research shows that its application greatly increases the anti-skid value of the original road surface. The pavement texture is uniform and does not harm the original pavement structure, which has a good social effect.
Research on the Standardization of Prefabricated Stairs in Prefabricated Buildings
ZHANG Zhengwei
2020, 2(5): 39-40.
Abstract (13) PDF (0)
Abstract:
Based on the prefabricated building, this paper first analyzes the related problems of the split layout of prefabricated stairs, then analyzes the important strategies of the standardization research of prefabricated stairs, and finally expounds the relevant setting problems of standard library in the research process of prefabricated stairs, aiming to provide technical support for the application and development of prefabricated buildings.
Analysis of Key Problems in Pile Foundation Design of High-rise Buildings
ZHENG Minqi
2020, 2(5): 41-42.
Abstract (103) PDF (0)
Abstract:
With the vigorous development of urbanization, the number of high-rise buildings increases gradually, both the height and the number of buildings increase. At present, the amount of concrete and steel structure in high-rise buildings is relatively large, and the construction difficulty coefficient is large and the investment cost is high. As a key component of high-rise building structure, the foundation building must be highly concerned about its architectural effect. When planning the foundation, we must ensure that the foundation structure has good stiffness and strength, and pay attention to the stability and load capacity requirements of the foundation structure. Based on this, this paper discusses the
Research on Construction and Quality Control Methods of Urban Water Pipelines
ZHOU Yong， XING Liang， FU Jingling
2020, 2(5): 43-44.
Abstract (12) PDF (0)
Abstract:
With the continuous development of cities, the water demand of urban residents is getting higher and higher, and the importance of tap water pipeline engineering has gradually become prominent.Urban water pipeline engineering is an important part of urban construction. In order to better meet people's needs, we must pay attention to the control of its construction quality. Based on this, this article focuses on the analysis of urban water pipeline construction, and proposes specific and feasible quality control methods, in order to escort the smooth development of urban water pipeline construction in my country.
Analysis on the Current Situation of Road Milling Machine Technology Research
LI Pengcheng
2020, 2(5): 45-46.
Abstract (12) PDF (1)
Abstract:
This article makes statistics and analysis on the patent literature and non-patent technology in the field of milling machine, from the overall structure, working principle, main working parts of road milling machine, etc., and predicts the future research and development direction of road milling machine.
Analysis on the Cause of the Trip Accident of the Main Transformer Differential Protection Caused by the Loose Current Terminal
LIU Qinwei， CHENG Xia
2020, 2(5): 47-48.
Abstract (7) PDF (0)
Abstract:
Current terminals are widely used in power supply and distribution systems. Although their size is small, if the operator neglects the inspection and tightening of the current terminals, it will inevitably affect the normal power supply and cause unnecessary losses. This article analyzes such accidents in detail and formulates solutions to provide reference for the peers to analyze and deal with similar accidents.
A Method of Quickly Removing the Allowance of Bearing Parts
YAN Hongwei
2020, 2(5): 49-50.
Abstract (25) PDF (0)
Abstract:
Aiming at the bearing products with large machining allowance and tight delivery period, this paper proposes a method and processing technology to quickly remove the allowance of bearing parts, so as to reduce the production cost, the practice shows that the method can greatly shorten the delivery period of bearings, improve the processing efficiency, and has a certain popularization value.
Optimized Design and Simulation of Automatic Adjustment of Roller Pitch of Three-dimensional Labor Protection Glove Machine
ZHANG Xiuxiang
2020, 2(5): 51-52.
Abstract (12) PDF (0)
Abstract:
At present, the requirements for the comfort and wear resistance of labor protection gloves are continuously increasing, but the actual production process is affected by many factors, resulting in a decrease in the yield of gloves.The study found that production equipment is a key factor affecting the improvement of labor protective gloves. Based on this, based on the labor protection glove machine, this article analyzes the innovation and improvement direction of the labor protection glove machine, in order to realize the optimized design of the automatic adjustment of the labor protection glove machine roller pitch.
Vibration Analysis of the Reactor Foundation
CHEN Xiangyong
2020, 2(5): 53-54.
Abstract (22) PDF (0)
Abstract:
In this paper, through the basic layout of the reactor, the influence factors on the vibration amplitude of the reactor are studied. Combining engineering examples, the elastic coefficient of reactor pile foundation is calculated in accordance with relevant requirements of domestic and foreign codes, and the vibration analysis of reactor foundation is compared and analyzed, in order to provide reference for engineering design.
Talking about the Dynamic Management and Control of Construction Engineering Cost
CAO Hongmei
2020, 2(5): 55-56.
Abstract (48) PDF (1)
Abstract:
At present, with the rapid development of my country's social economy, the construction industry has entered a period of vigorous development. Studies have found that the dynamic management and control of construction engineering costs play a vital guiding role in the development of the construction industry.Based on this, this article conducts an in-depth analysis of the dynamic management and control of construction project cost management,with a view to contributing to the sustainable development of the construction industry.
Research on Quality Management of Highway Construction Project
LI Yinlei
2020, 2(5): 57-58.
Abstract (216) PDF (8)
Abstract:
With the development of my country's economy, the scale of highway construction continues to expand,and the current highway industry has achieved remarkable results. However, behind its rapid development, there are still many problems, such as frequent early road diseases and worrying road conditions. Based on this, in order to improve highway performance and improve highway quality management level, it has become a key issue to be solved urgently.Based on a full understanding of the quality management issues of highway construction projects, this article puts forward several suggestions in order to effectively improve the quality management level of highway construction and promote the sustainable and healthy development of my country's highway industry.
Talking about the Strengthening Strategy of Sampling Inspection Work in Engineering Quality Supervision
LIU Xiancai
2020, 2(5): 59-60.
Abstract (19) PDF (0)
Abstract:
Quality supervision is an indispensable content in the development of modern engineering construction.Sampling inspection, as the main method of project quality supervision and management, can intuitively, quickly and truly understand the overall quality of the project.Based on this,on the basis of a comprehensive understanding of the meaning of random inspections, this article explains the significance of random inspections in project quality supervision,and puts forward several suggestions, hoping to further improve the supervision and management system of China's engineering construction industry and promote the sustainability and health of engineering construction、development.
Application of Fine Management in Construction Engineering Management
WANG Chaozhong
2020, 2(5): 61-62.
Abstract (19) PDF (0)
Abstract:
This paper discusses and studies the application of fine management in the construction project management in order to promote the development and progress of the construction industry.
Common Problems and Solutions in Construction Management of Highway Subgrade and Pavement
HAN Hui
2020, 2(5): 63-64.
Abstract (62) PDF (3)
Abstract:
Subgrade and pavement construction is one of the important links in highway engineering construction.Especially in the current social situation, people's requirements for traffic quality are getting higher and higher.Therefore,the management of roadbed and pavement construction of road and bridge engineering is particularly important, which can not only ensure the smooth development of the project, but also improve the construction quality of the project.Based on this, this article first introduces the importance of highway subgrade and pavement construction management,and then analyzes the common problems in highway subgrade and pavement construction management, and finally puts forward relevant measures to effectively solve the construction management problems in highway subgrade and pavement, hoping to provide relevant industry professionalsfor reference.
Talking about the Claim Application in International Engineering Project Management
WANG Huan
2020, 2(5): 65-66.
Abstract (28) PDF (1)
Abstract:
Claims by international contracting companies are a common problem in international engineering project management.With the deepening of reform and opening up, the scale of Chinese and foreign enterprises going abroad to carry out international economic and technical cooperation and international contracting projects has gradually increased, and project claims have also increased.Some companies compensate losses through engineering claims,accumulate experience, and improve project management.However, in the actual project claim, if there are certain limitations in copying the claim experience and methods of other projects, the key to the claim is to master and flexibly use the basic principles and handling skills of the claim.Seizing the right time is the basis for the successful claim.Based on the author's many years of engineering management experience, this article discusses the specific application of international engineering contracting project claims based on the analysis of claims in international engineering project management for reference.
Problems and Countermeasures of Mechanical Processing Equipment Management
WANG Jianmei
2020, 2(5): 67-69.
Abstract (18) PDF (0)
Abstract:
The machinery industry is a national pillar industry, and whether machinery and equipment management is in place will directly affect the development of the entire industry. In the production of enterprises, mechanical processing equipment is an important equipment to ensure the output and quality of enterprises. With the continuous increase of types, specifications and models of mechanical processing equipment, how to use mechanical processing equipment reasonably becomes the key. To this end, this article first elaborated the management of mechanical processing equipment, and on this basis, put forward the corresponding management countermeasures and safeguards,with a view to comprehensively enhance the market competitiveness of enterprises.
Talking about the Daily Standardized Management Measures of Mechanical Laboratory
XIAO Bin， XU Liang， XIONG Feilong， LI Quan， WANG Guoyong
2020, 2(5): 70-71.
Abstract (21) PDF (0)
Abstract:
As the country’s demand for application-oriented talents continues to increase, major universities across the country have injected funds into mechanical laboratories, so that various types of instruments and equipment in mechanical laboratories are becoming more and more complete. In this context, universities are alsoPay more and more attention to the management and operation of the laboratory.However, there are still many shortcomings and problems in the daily standardized management of mechanical laboratories.For example, the utilization rate of experimental equipment is not high, the degree of openness is not standardized, and the use process is more complicated.Based on this, the author combined his own practical experience to briefly explain this, in order to provide a reference for the standardized management of mechanical laboratories.
Cause Analysis and Early Warning Management of Construction Safety Accidents
YAO Jiangwei
2020, 2(5): 72-73.
Abstract (10) PDF (0)
Abstract:
With the continuous acceleration of urbanization, the number and scale of China's construction projects are increasing. Due to the large number of construction machinery and equipment used in the construction of highrise buildings, this will increase the risk factors in the construction process, it is a great threat to the life safety of construction personnel, if the relevant safety management is not standardized during construction, it's easy to cause safety accidents, so as to affect the construction progress and cycle of the construction project, and affect the later construction quality. Based on this, this paper analyzes the causes of safety accidents in construction industry, and studies the early warning management strategy of construction engineering safety accidents, in order to reduce the safety accidents of construction projects
Analysis on the Problems and Countermeasures of the Construction Safety Management of Super High-rise Buildings
ZHENG Guohui
2020, 2(5): 74-75.
Abstract (121) PDF (7)
Abstract:
With the continuous development of my country's social economy, the available land resources are becoming less and less. Super high-rise buildings are a better choice to save land resources. However, during the construction of super high-rise buildings, the accompanying construction risks are also great. During the construction of super highrise buildings, the construction unit needs to deal with all aspects of the safety issues in the construction process. Based on this, this article introduces the solutions to the hidden dangers of super high-rise buildings from the safety problems existing in the construction of super high-rise buildings for the reference of relevant persons.
Talking about How to Do Public Safety Management in Overseas Projects
LI Ming
2020, 2(5): 76-78.
Abstract (59) PDF (3)
Abstract:
The Kaifi Road project is located in Nigeria. The country has sharp internal conflicts, political turbulence,frequent terrorist activities, and fierce tribal conflicts. Therefore, the security issues in the areas along the project are facing major threats.Based on this, in order to do a good job in the public safety management of Kaifei Road project,this article conducts in-depth research and analysis, hoping to provide some reference for the public safety management of overseas projects.
Research on Optimization Measures of Lightning Protection Detection for High-rise Buildings
CHAI Bo
2020, 2(5): 79-80.
Abstract (15) PDF (0)
Abstract:
With the continuous acceleration of the national urbanization development process, a large number of mid- and high-rise buildings in cities have emerged. While high-rise buildings solve the problem of people's living,they also have problems such as high-rise buildings that are easily affected by lightning disasters. Based on this, this article elaborates on issues such as lightning protection detection for high-rise buildings, in order to further promote the development of lightning protection detection technology for high-rise buildings.
Application of UAV Oblique Photography Technology in Large-scale Topographic Map Surveying and Mapping
PAN Xialing
2020, 2(5): 81-82.
Abstract (37) PDF (0)
Abstract:
In recent years, with the continuous advancement of science and technology, drone tilt photography technology has been widely used in the process of large-scale topographic map surveying and mapping, which can improve surveying and mapping on the basis of ensuring the accuracy of large-scale topographic map surveying and mapping. It saves investment in manpower, material and financial resources and brings good economic benefits to surveying and mapping enterprises.
Talking about the Application of GPS Technology in Dredging Engineering
ZHOU Shiyong
2020, 2(5): 83-84.
Abstract (18) PDF (0)
Abstract:
With the progress of the times and the development of science and technology, measurement technology has also entered the high-tech era. This article discusses the application method of GPS technology in dredging engineering through engineering examples. Through the introduction of GPS positioning principles, characteristics,and its installation and use in dredgers, let everyone know more about the application of GPS technology in dredging engineering. Further understanding, has a certain reference role.
Application of BIM Technology in Engineering Survey
LIU Zhiting
2020, 2(5): 85-86.
Abstract (79) PDF (0)
Abstract:
With the continuous development of science and technology, traditional architectural engineering survey can not achieve the goal of 3D visualization, BIM technology can improve the accuracy of the scheme model, it plays a positive role in promoting all aspects of the architectural environment. Based on this, this paper discusses the basic connotation of BIM Technology, the application of BIM Technology in engineering survey is studied.
Analysis of Influencing Factors and Detection Methods of Asphalt Pavement Smoothness
YANG Li
2020, 2(5): 87-88.
Abstract (20) PDF (0)
Abstract:
Asphalt pavement has good overall performance and practicability. Compared with cement concrete pavement,it has higher driving comfort and safety. However, the material properties and construction process are affected by various factors, and the smoothness of the road surface is difficult to control. It is particularly important to do a good job in quality control, application of testing equipment and construction acceptance. Based on this, the article summarizes the influencing factors of highway asphalt pavement smoothness, and analyzes its smoothness detection method, so as to better improve the construction quality of asphalt pavement and ensure the comfort and safety of driving.
Research on Energy-saving Thermal Insulation and Environmental Protection Performance of New Building Materials
LI Fashuai
2020, 2(5): 89-90.
Abstract (10) PDF (0)
Abstract:
Energy-saving insulation materials have good use value in the construction of building infrastructure and internal heating design of the structure. Based on this, this article discusses the types of new building materials, and studies the energy-saving, thermal insulation and environmental protection properties of new building materials in order to improve the thermal insulation performance of buildings.
Talking about the Application of Intelligence, Humanity and Ecology in Interior Space Design
LI Han
2020, 2(5): 91-92.
Abstract (9) PDF (0)
Abstract:
With the continuous development of social economy, people have put forward higher requirements for the living environment, and the current interior design has become the focus of attention. Based on this, this article elaborates in detail that the design concepts of intelligence, humanization and ecology are integrated into the interior space design to make the design content more reasonable, in order to fundamentally improve the quality of the space design.
Application Analysis of Energy Saving Concept in Building Construction Technology
LOU Chunyu
2020, 2(5): 93-94.
Abstract (10) PDF (0)
Abstract:
In the context of sustainable development, all walks of life are paying more attention to energy conservation and emission reduction. Studies have found that the development of the construction industry plays a decisive role in energy consumption and pollution.The application of energy-saving concepts in current building construction technology has gradually become a general trend, which plays a vital role in economic development, reduction of energy consumption,environmental protection and even the development of the construction industry.
Research on the Application of Electromechanical Energy Saving Measures in Building Electromechanical Engineering
MAO Zhiquan
2020, 2(5): 95-96.
Abstract (112) PDF (0)
Abstract:
The electromechanical equipment in buildings is the key to ensure people's power quality, production and life. In the context of continuous improvement of science and technology, the improvement of people's electricity quality has put forward higher development requirements for electromechanical equipment. Based on this, this article analyzes the application of mechanical and electrical energy-saving measures in building mechanical and electrical engineering, in order to promote the development of mechanical and electrical energy-saving technology.
Analysis on the New Technology and Development Trend of HVAC in Mechanical and Electrical Installation Engineering
WANG He
2020, 2(5): 97-99.
Abstract (14) PDF (0)
Abstract:
With the development of economy and the progress of society, the process of urbanization is accelerating,and there are more and more large-scale high-rise buildings. HVAC has become an important electromechanical equipment indispensable to ensure the indoor temperature of buildings.HVAC technology can adjust the indoor environment but consumes more energy.With the widespread use of HVAC, people have higher and higher requirements for HVAC.This article analyzes the new HVAC technology of mechanical and electrical installation engineering and studies its future development trend, in order to further improve the development space of HVAC technology.
Talking about the Preparation Technology and Road Performance of SBS Rubber Compound Asphalt
CHAI Jun
2020, 2(5): 100-102.
Abstract (21) PDF (0)
Abstract:
The study found that after scientific processing of base asphalt with SBS modifier and rubber powder, the penetration of this type of asphalt decreases, while the softening point, ductility and elastic recovery are significantly increased, which indicates the high temperature stability and The low temperature deformation ability has been greatly improved. Based on this, this article discusses the preparation process and road performance of the composite asphalt in order to provide a reference for related research.
Discussion on Teaching Improvement and Practice of Architectural Engineering Survey Course
HE Fengxue
2020, 2(5): 103-104.
Abstract (40) PDF (0)
Abstract:
The construction engineering survey course is highly practical, and it is a very important professional course. Combining with the current teaching mode, in order to improve students' practical operation ability and enhance their own comprehensive competitiveness, it is necessary to continuously improve the current course teaching mode, teaching content and teaching practice. Based on this, this article mainly expounds the importance of the construction engineering measurement course in the teaching reform, conducts an in-depth analysis of the current teaching situation and the existing problems of the construction engineering measurement course, and proposes corresponding course improvement methods and practical measures.
Study on Strengthening and Mix Design of Recycled Aggregate of Cement Stabilized Macadam
LI Chunmei
2020, 2(5): 105-106.
Abstract (73) PDF (1)
Abstract:
Based on the comprehensive understanding of the properties of recycled aggregate,this paper analyzes the related contents of recycled aggregate strengthening test and mix proportion design, hoping to effectively improve the utilization rate of cement stabilized macadam milling material and promote the sustainable development of highway industry.
Research on Cost Management and Cost Control Countermeasures of Mechanical and Electrical Installation Engineering
YUAN Chunhong
2020, 2(5): 107-108.
Abstract (23) PDF (0)
Abstract:
Mechanical and electrical installation engineering needs to use a variety of types and specifications of materials and equipment, and its internal materials and parts are constantly updated, resulting in cost control and cost management is difficult. Based on this, this paper puts forward some cost management and cost control countermeasures of mechanical and electrical installation engineering.
Talking about the Application of Hydraulic Geological Technology in Geological Disaster Control Engineering
LIU Sijia
2020, 2(5): 109-110.
Abstract (33) PDF (0)
Abstract:
At this stage, the geological disaster control technology of hydraulic engineering has a high value in the process of analyzing the occurrence conditions and evolution trend of natural geological disasters. Based on this, this article first analyzes the geology of hydraulic engineering and some common geological disasters, and then proposes the practical application of geological technology of hydraulic engineering in geological disaster management, in order to further promote the development of geological technology of hydraulic engineering.
Analysis on the Main Points of Quality Management in the Whole Process of Large Real Estate Development
NI Yunlong
2020, 2(5): 111-112.
Abstract (47) PDF (0)
Abstract:
In recent years, with the continuous strengthening of my country's economy, the scale of my country's real estate is constantly expanding, and the corresponding competition among real estate development is also constantly intensifying.Therefore, the whole process quality management of large-scale real estate development projects has become an important task.This article briefly introduces the connotation of the whole process quality management of large-scale real estate development projects, the importance of the whole process quality management and the main points of the whole process quality management of large-scale real estate development projects, in order to further improve the whole process quality management of real estate projects
Cause Analysis and Control Method of Construction Cost out of Control
SHI Jianqing
2020, 2(5): 113-114.
Abstract (19) PDF (0)
Abstract:
In this paper, combined with the relevant reasons of the construction project cost out of control, detailed analysis of the specific measures to effectively control the construction cost out of control, as well as to reduce and control the impact and loss caused by the phenomenon of construction project cost out of control on construction enterprises.so as to ensure the smooth realization of the expected development goals of construction enterprises.
Exploration of Rural Highway Management and Maintenance under the Background of the Development of a Powerful Transportation Country
ZHU Junping
2020, 2(5): 115-116.
Abstract (22) PDF (0)
Abstract:
At present, the quantity and quality of rural road construction in our country are continuously improving,which has laid a solid foundation for the realization of a strong transportation country. However, in the process of developing rural roads, rural roads are generally low in grade, long in total mileage, huge in structure, and roads often face problems such as vehicle overload, water damage and subsidence, and variable operation and maintenance personnel,which directly affect rural roads. Life. Therefore, the later maintenance and management issues become more prominent and important. In recent years, the maintenance and management of rural roads has received more and more attention from governments at all levels. In order to further play the role of rural roads and extend their service life, actively solve the problems existing in the management and maintenance at this stage and adopt effective countermeasures to improve The key to the maintenance and management level of rural roads.
Site Stability and Suitability Evaluation of Cangxi Navigation Mark Station
TIAN Wenfeng， LIN Rui， YANG Yuguo， LI Jianwei， WANG Xiang
2020, 2(5): 117-120.
Abstract (17) PDF (0)
Abstract:
Site stability and suitability evaluation is an important content in geotechnical engineering survey and evaluation. Whether the evaluation conclusion is appropriate or not will have a direct impact on the feasibility and cost of the project, which is not given in the current traffic and water operation industry related regulationsAccording to the corresponding evaluation rules, technical personnel often lack basis when making relevant evaluations, which results in more random evaluation conclusions.This article takes the station building as an example, combined with its engineering characteristics and personal engineering experience, and comprehensively refers to the corresponding regulations of the industry (hydropower, urban and rural planning) and the special project of the station building disaster assessment to determine the stability and suitability of the station building site.The evaluation method is introduced in detail, and the evaluation conclusion will provide a reasonable basis for the subsequent geotechnical engineering evaluation and design, and also provide a reference for colleagues in the transportation, water transport and highway industries in order to obtain a consensus.
Causes of Abnormal Operation of Secondary Circuit in Substation Operation and Treatment Measures
WU Yaoyang
2020, 2(5): 121-122.
Abstract (42) PDF (0)
Abstract:
As an important part of the power system, the substation ensures the stability of the power supply of the power system through the transformation of voltage and current. This article first analyzes the cause of the abnormal operation of the secondary circuit in the substation operation, and proposes solutions based on this in order to provide reference for related industries.
Research on Cost Optimization Control Method and Application in Early Stage of Project
XUE Yuqin
2020, 2(5): 123-124.
Abstract (12) PDF (0)
Abstract:
The reasonable control of the initial cost of the project within a certain range can effectively reduce investment risks and achieve the expected return target. Based on a comprehensive understanding of the related concepts of construction project cost, this article expounds the role of the optimization control of the early stage cost of the project, and proposes the optimization control method of the early stage cost for reference.
Talking about the Control Measures of Urban Road Engineering Cost
ZHOU Huan
2020, 2(5): 125-126.
Abstract (10) PDF (0)
Abstract:
The infrastructure construction is constantly improving. Among them, urban roads, as a livelihood project that plays an important role in people's lives and urban economic development, have been plagued by the problem of high project cost. Based on this, this article analyzes the problem of high cost of urban road projects, and discusses from the road project budget, road scheme design and strengthening construction management, in order to effectively control the project cost.
Talking about How to Improve the Status of Supervision in Engineering Construction Management
ZHANG Hongquan
2020, 2(5): 127-128.
Abstract (23) PDF (0)
Abstract:
In recent years, my country has developed rapidly, and the field of engineering construction has also ushered in rapid development. Construction units, survey and design units, supervision units and construction units in the field of engineering construction are gradually increasing and strengthening.In recent years, there have been discussions on supervision reform in the field of engineering construction. As an independent third party in the field of engineering construction, the supervision unit should seek reform direction from itself, improve its position in the field of engineering construction,and be respected.
Copyright © Editorial Department of Intelligent Construction and Engineering Machinery京ICP备00000000号-0
Address：Box 16, No. 1, Beishatan, Deshengmenwai, BeijingTel：010-64883726Email：znjzygcjx@163.com

Supported by: Beijing Renhe Information Technology Co. Ltd