2021 Vol. 3, No. 8

Display Method:
Analysis of Construction Technology and Quality Control Strategy of Cast-inplace Concrete in Building Engineering
GONG Weiwei
2021, 3(8): 1-3.
Abstract:
In recent years, my country's social development has accelerated, and the market economy has shown a significant growth trend. Under this general environment, my country's infrastructure construction and construction industry have entered the fast lane of development and have gradually become the st...
Research on Application of Soft Foundation Treatment Construction Technology in Highway Engineering Construction
LONG Haisheng
2021, 3(8): 4-6.
Abstract:
Due to the rapid development of our country, the society's demands and requirements for highway projects are constantly increasing. In order to meet this demand, our country has increased the construction of highway projects. The highway engineering industry will have great development prospects and...
Talking about the Construction Technology of PVC Plastic Floor and Its Application in Engineering
SHEN Zhihong
2021, 3(8): 7-9.
Abstract:
The building materials needed for PVC plastic floor not only have the excellent characteristics of not containing any formaldehyde, no radiation, good wear resistance, etc., but also can eff ectively inhibit the adhesion and generation of various bacteria living on the human body. Environmental poll...
Discussion on Compaction Construction Technology and Quality Control of Highway Subgrade
WANG Dewang
2021, 3(8): 10-12.
Abstract:
Nowadays, with the rapid development of expressway in China, the requirements for highway subgrade compaction construction technology and quality control are also improving. Firstly, this paper analyzes the relevant control measures of highway subgrade construction technology, and takes a highway pr...
Analysis of Preventive Maintenance Construction Technology for Asphalt Pavement of Municipal Roads
YAO Wantang
2021, 3(8): 13-15.
Abstract:
For a long time,municipal roads have been the basic conditions for urban development,especially today as the scale of cities continues to expand.The continuous acceleration of urbanization has led to batches of infrastructure construction projects,and at the same time,it has been further increased.G...
Construction Technology of Large-span Continuous Bridge
ZHOU Yu
2021, 3(8): 16-18.
Abstract:
In recent years, with the deepening and continuous development of bridge construction in China, the technical type led by the large-span continuous bridge construction technology is gradually applied and popularized to the bridge construction system.Combined with the site construction, the construct...
Comparative Study on a New Type of Rock Excavation Method with Vibratory Rock Cracker and Traditional Non-blasting Rock Excavation Method
WANG Huanzhen
2021, 3(8): 19-21.
Abstract:
Based on the summary of construction experience of vibrating rock cracker and comparison with other non-blasting excavation methods, this article expounds the characteristics, advantages and disadvantages and scope of application of the new non-blasting excavation method of vibrating rock cracker. I...
Discussion on Main Factors Affecting Construction Quality of Water Conservancy Projects and Control Strategies
XIE Xiang
2021, 3(8): 22-24.
Abstract:
With the continuous acceleration of the social process, the quality control of water conservancy projects has become increasingly urgent. The main task of this work is to ensure the complete completion of the entire project. Therefore, we should pay more attention to it in our daily work. However, i...
Research on Construction Technology of Deep Foundation Pit of Hydraulic Structure under Marine Silt Soil
XU Lingxi
2021, 3(8): 25-27.
Abstract:
This article takes the second phase of the second water plant and supporting pipeline network in Xuwei New district, Lianyungang city as an example. Through the analysis of engineering geology, hydrological conditions, support design and construction, etc.,Finally, the foundation pit adopts a relati...
Analysis on Common Problems and Solutions of Municipal Construction Technology
ZHANG Jilong
2021, 3(8): 28-30.
Abstract:
With the significant improvement of China's economic level, municipal engineering projects have developed greatly, the number of municipal construction projects is also gradually increasing, we need to pay attention to the construction quality of municipal construction projects. The construction tec...
Analysis and Research on Automatic Water Pump Water Supply Control System
CAI Yuan
2021, 3(8): 31-33.
Abstract:
At present, my country's automation technology in the field of machinery and electric power is gradually being popularized and applied with the development of science and technology. Various fields are actively trying to create automated control modes. Automated pump water supply control system play...
Development of Intelligent Automatic Lubrication Device for Turnout External Locking
CHEN Zhiying
2021, 3(8): 34-36.
Abstract:
As a key equipment for electrical maintenance, turnouts will have a great impact on the order of high-speed railway transportation once the switch bayonet occurs due to the delay in oil injection, and the loss indicates a failure. The intelligent automatic lubrication device for the outer lock of th...
Research on the Linkage Control System of Metro Signal and Platform Screen Door
LI You
2021, 3(8): 37-39.
Abstract:
This paper analyzes the linkage principle, control process and monitoring system between subway signal and PSD. Based on this, for common fault problems, put forward targeted countermeasures, so as to provide guarantee for the operation eff ect of Metro signal and PSD linkage control system.
Cause Analysis and Treatment of Low Ball Collecting Rate of Condenser
LIU Ruiying
2021, 3(8): 40-42.
Abstract:
The condenser of unit 4 of Jiayuguan Hongsheng electric heating Co., Ltd. is n-19500-1 type condenser produced by Harbin steam turbine works. The condenser is equipped with two sets of condenser tube bundle cleaning rubber ball devices, which often leads to low ball collecting rate.Throughthe analys...
Discussion on the Technology of NC Turning Thin Wall Composite Parts
LIU Yingying
2021, 3(8): 43-45.
Abstract:
Thin walled parts are diffi cult and complex parts in NC machining. Because of their advantages of light weight, compact structure, high precision and low cost, they are widely used in industrial production. However, due to the characteristics of poor rigidity and strict error requirements, the requ...
Discuss the Combined Application of Mechanical Design and Industrial Design
TAO Yongchao
2021, 3(8): 46-48.
Abstract:
Mechanical design occupies an important position in mechanical engineering. With the rapid development of science and technology, companies must ensure the quality of mechanical design, improve mechanical performance, and provide a solid foundation for mechanical production. Mechanical design and in...
Application of CAD Technology in Mechanical Engineering Design
ZHANG Huiqiang
2021, 3(8): 49-51.
Abstract:
The machinery manufacturing industry is one of my country's basic industries, and it plays a decisive role in the development of the national economy. To promote the healthy and rapid development of the machinery manufacturing industry, it is necessary to improve the quality of mechanical engineerin...
Research on Intelligent Application of Network Video Surveillance Technology
ZHANG Xiaoyi
2021, 3(8): 52-54.
Abstract:
The application of network video technology has the advantages of networking and intelligence. Based on this, this paper discusses the application characteristics of network video technology, analyzes the role of network video technology application, and studies the intelligent application of networ...
Research & Design for One Kind of Multifunctional Moving Van
ZHONG Cailin
2021, 3(8): 55-57.
Abstract:
The multifunctional moving van was researched and designed,which has the advantages of no noise,no pollution,low energy consumption,it has strong applicability with high efficiency; Special battery and reliable motor were equipped on it,It was safe and durable, and it has the brake and power-off fun...
Research on Fault Prediction Model of ZPW-2000A Track Circuit Based on Improved ELM
WANG Yulin
2021, 3(8): 58-61.
Abstract:
Track circuit is an important basic equipment to ensure the safe and reliable operation of trains. With the transition from "fault repair"to "state repair" of railway signal equipment, in order to analyze track circuit monitoring information and formulate a scientific and reasonable maintenance stra...
Application and Test Analysis of Accumulator in Lubricating Oil System of Large Steam Turbine Unit
WANG Qiubao
2021, 3(8): 62-64.
Abstract:
This paper introduces the design characteristics of the mainstream lube oil system of large steam turbine units, introduces the application of accumulator in the lube oil system, and verifi es the reliability of the lube oil system of large steam turbine units through experimental analysis to avoid ...
The Important Value of Schedule Management in Construction Project Management
CHEN Benyuan
2021, 3(8): 65-67.
Abstract:
With the steady development of society and the improvement of economic level, the construction industry has gradually become a pillar industry of the national economy, and the number and scale of construction projects have also expanded. However, the rapid development of construction projects has le...
Research on Intelligent Safety Management of Engineering Project
HUANG Liqiong
2021, 3(8): 68-70.
Abstract:
Intelligent safety management in the construction site has become one of the important measures of safety supervision in construction enterprises, and it is also the inevitable trend of safety production in the future. Urban modernization promotes the development of construction industry, and the in...
Safety Management and Construction Quality Control of Electric Power Construction Site
JIANG Weiyi
2021, 3(8): 71-73.
Abstract:
As one of the key projects in the process of social development, power engineering plays a vital role in people's daily life and production. Therefore, in the process of power construction site construction, we should further improve the safety management of the construction site, and formulate targ...
Analysis of Modern Construction Project Management Mode and Its Technological Innovation
NIU Junmin
2021, 3(8): 74-76.
Abstract:
In order to adapt to the development of modern construction industry, the construction project management mode is facing the situation of transformation and innovation. Under the background of market economy, how to build an innovative project management model is one of the keys for construction eng...
Discussion on the Equipment Management of Caterpiller Crane for Seacrossing Bridge under Complex Environment
ZHAO Zhisen
2021, 3(8): 77-79.
Abstract:
Based on Pingtan Straits Rail-cum-Road Bridge, this paper analyses and elaborates the system construction, management system, safety management, maintenance data analysis, summarizes the experience of caterpiller crane operation and management under complex marine conditions and how to improve the c...
Problems and Countermeasures in the Cost Management of Housing Construction Engineering
ZHU Min
2021, 3(8): 80-82.
Abstract:
At present, the domestic construction market is improving day by day, and the criticality of project cost management has gradually emerged. In order to promote the sustained and stable development of the domestic construction industry, we must fully understand the importance of project cost manageme...
Analysis on Construction Safety Management of Urban Rail Transit Subway
LIU Dongyun
2021, 3(8): 83-85.
Abstract:
With the continuous development of China's economy and society, the construction of urban rail transit has been continuously improved, which has brought great convenience to people's travel and greatly increased the driving force of economic development. However, there are still many security loopho...
Discussion on Cost Management of Intelligent Building's Whole Life Cycle
LIU Zhengyou
2021, 3(8): 86-88.
Abstract:
The effective integration of smart technology and building technology has resulted in smart buildings. Today, with the in-depth development of smart technology, more and more smart buildings have appeared on the market. Many of the functions of these smart buildings are intelligent. Features. Howeve...
Analysis and Discussion on Testing Experiment and Common Problems of Building Engineering Materials
TAO Zepeng
2021, 3(8): 89-91.
Abstract:
Building materials are important elements that aff ect the overall quality of construction projects. If building materials do not meet the standard, it will greatly affect the safety of buildings and the exertion of use functions, which needs to give full play to the value of material testing and ex...
Analysis of Energy Saving and Green Environmental Protection Technology in Municipal Engineering Construction
WANG Chengjun
2021, 3(8): 92-94.
Abstract:
In the process of rapid development of economy and society, people pursuit of quality of life have higher, more and more hope in a green environment, low pollution and rapid urbanization in all kinds of municipal engineering project implementation, because there is a noise, dust and other kinds of p...
Countermeasures of Strengthening Fire Control Supervision and Management of High-rise Buildings
DU Hang
2021, 3(8): 95-97.
Abstract:
With the rapid development of China's economy and science and technology, China's construction technology is also making continuous progress, followed by building fire safety problems, China's building fire supervision and management is facing unprecedented challenges. This paper discusses the signi...
Discussion on the Application of Geophysical Methods in Deep Prospecting of Metal Mines
LI Chunwei
2021, 3(8): 98-100.
Abstract:
The use of geophysical methods can play an eff ective role in predicting metal mineral resources hidden in the deep part of the earth. In recent years, the use of geophysical methods for deep ore prospecting has achieved certain results. With the continuous improvement of the level of science and te...
The Current Situation and Improvement Measures of Safety Production Management in Mechanical Processing Enterprises
LI Fangfang
2021, 3(8): 101-103.
Abstract:
At this stage, whether it is for large-scale processing and manufacturing enterprises or small and medium-sized processing and manufacturing enterprises, if they want to gain an advantage in market competition and competition between enterprises, it is necessary to realize the modernization of produ...
Study on Key Points of Fire Prevention Supervision and Inspection of Urban High-rise Buildings
LIU Qian
2021, 3(8): 104-106.
Abstract:
In order to promote the construction process of urban high-rise building fire safety system, reduce the probability of high-rise building fire accidents, and protect the property and life safety of high-rise building users. The fire department should focus on the fire supervision and inspection of h...
Analysis on the Thermal Imbalance of the Urban Central Heating System
QIAO Jinjing
2021, 3(8): 107-109.
Abstract:
Nowadays, urban residents have higher and higher requirements for central heating system, and the thermal imbalance of central heating system has been widely concerned and valued by people. This paper takes a project as an example, discuss the thermal characteristics of the radiator, analyze the the...
Explore the Strategy of Improving the Work Skill Level of Fitter Workers
WEI Qiang
2021, 3(8): 110-112.
Abstract:
Under the background of the project scale, it is very important to further standardize the function of fitter. We must find ways to improve the skill level of fitter, and then ensure that the relevant operations are more standardized and standardized, and effectively improve the comprehensive qualit...
The Application of Digital Modeling in Fire Protection Facilities and Fire Protection Supervision
YANG Weiwei
2021, 3(8): 113-115.
Abstract:
In modern urban construction, the reasonable design and planning of building fire-fighting facilities and the establishment of building fire prevention supervision system are closely related to the fire safety performance of urban buildings. Based on this, this paper analyzes the existing problems o...
Research on the Fire Control Effect of Different Fire Scenes in a Typical Indoor Large Stadium in a Large Children's Playground
ZHENG Zongzhu
2021, 3(8): 116-119.
Abstract:
Indoor large-scale children's playground is a rising industry in recent years, which has moved the traditional outdoor amusement projects into indoor venues, it not only improves the entertainment experience level of guests, but also brings some fire problems and safety challenges, diversified busin...
Problems and Countermeasures of Construction Project Bidding
GAO Xuejing
2021, 3(8): 120-122.
Abstract:
In project construction,bidding is a form of procurement,which adopts the method of bidding to compete for the project,so as to provide a fairer competition environment for all kinds of bidders In the process of economic development in our country.The construction industry is the earliest industry d...
Research on the Construction of Performance Evaluation Index System of Infrastructure Construction Projects in Gaoxin District in Zhengzhou City
REN Fei
2021, 3(8): 123-125.
Abstract:
At this stage, the number and scale of infrastructure projects under the development of urbanization have been expanded, so it is particularly important to build a performance rating index system. Therefore, this paper expounds in detail the influencing factors and principles to be followed in the r...
Hidden Fire Hazards and Fire Supervision of High-rise Buildings
XU Jiang
2021, 3(8): 126-128.
Abstract:
At present, as an important symbol of modern city, the number of high-rise buildings is increasing with the promotion of modern urban construction. The structure of high-rise buildings is complex and there are many fire hazards, if we do not strengthen prevention and control, the fire incidence will...